Gas tungsten arc welding (GTAW) or Tungsten inert gas welding (TIG) is one of the widely used techniques for joining ferrous and non-ferrous metal.Gas tungsten arc welding process,consist of non-consumable tungsten electrode which is used to provide the arc for welding. During the welding cycle a shield of inert gas expels the air from the welding area and prevents oxidation of the electrode, w...

Submerged arc welding is preferred over other methods of welding because of its inherent qualities like easy control of process variables, high quality, deep penetration, smooth finish, capability to weld thicker sections. Since the development of submerged arc welding process, welding engineers are striving for reduction in welding cost without compromise in the performance of the weld. Flux u...

Submerged arc welding also known as sub arc welding has become a chief welding process because of its ability to deposit large amounts of metal with high penetration. The quality of weld depends on bead geometry of the weld which in turn depends on the process variables. This paper deals with the application of factorial design approach for optimising four submerged arc welding parameters viz. ...

Inert-gas Arc Welding of Aluminium Aluminium is used widely in metal fabrication processes, chiefly on account of its lightness, the ease with which it may be cast, and its extreme ductility. It is also highly resistant to corrosion, owing to the formation of a protective film of oxide on the surface of the metal. This latter property, however, becomes a disadvantage when it is desired to weld ...

The automated welding systems, have received much attention in recent years, because they are highly suitable not only to increase the quality and productivity, but also to decrease manufacturing time and cost for a given product. To get the desired quality welds in automated welding system is challenging, an algorithm is needed that has complete control over the relevant process parameters in ...

Industrial technology programs around the country must be sensitive to the demands of manufacturing and industry as they continue to replace “vocational” curriculum with high-tech alternatives. This article examines whether or not teaching oxyacetylene welding in the industrial technology classroom is required to learn arc welding processes. The results of this study suggests that there appears...

The arcs associated with arc welding emit high levels of ultraviolet radiation (UVR), and this often causes acute injuries in the workplace, particularly photokeratoconjunctivitis. It is important to know the level of UVR emitted by arc welding under various conditions, as this information will help in evaluating potential UVR hazards in welding workplaces and taking protective measures against...

In this study, the effect of various welding parameters on the weldability of Mild Steel specimens having dimensions 50mm× 40mm× 6 mm welded by metal arc welding were investigated. The welding current, arc voltage, welding speed, heat input rate are chosen as welding parameters. The depth of penetrations were measured for each specimen after the welding operation on closed butt joint and the ef...

This paper develops an automatic welding control scheme for alternating current shielded metal arc welding (SMAW) system. A mathematical model of the welding control system is derived and the system parameters identified. An adaptive sliding mode controller is designed to estimate the bound of the system uncertainties and to modulate the electrode feed rate in such a way that the desired arc le...