In this study, we report the synthesis and application of mesoporous CoFe2O4@MIL-100(Fe) hybrid magnetic nanoparticles (MNPs) for the simultaneous removal of inorganic arsenic (iAs). The hybrid adsorbent had a core-shell and mesoporous structure with an average diameter of 260 nm. The nanoscale size and mesoporous character impart a fast adsorption rate and high adsorption capacity for iAs. In ...

The potential to remove chromium(VI) from aqueous solutions through biosorption using coffee husk was investigated. The effects of pH, contact time, initial concentration and adsorbent dosage on the adsorption of Cr(VI) were studied. The data obeyed Langmuir and Freundlich adsorption isotherms. The Langmuir adsorption capacity was found to be 44.95 mg/g. The Freundlich constants Kf and n were 1...

recently, the use of biological absorbent in removal of hazardous pollutants such as heavy metals has increased because of the decrease in sludge problems, economical issues, high efficiency and compatibility with the environment. this study was done over the biosorption of nickel by biosolids obtained from the municipal wastewater treatment in a batch reactor. the pretreatment of the biosolids...

This study investigated arsenate and arsenite adsorption on an iron(III) oxide/silica adsorbent that had a Fe/Si molar ratio of 3. Batch experiments were conducted with regard to adsorption kinetics, isotherms, pH effects and interference of phosphate and sulfate on arsenic adsorption. The adsorption of arsenite was faster than that of arsenate. The adsorption kinetics could be well described b...

Pollution of water resources by various pollutants is nowadays a global environmental issue. Among the different type of water pollutants, dye represents a major polluting group. In this study, Azolla filiculides roots have been used for adsorption of Malachite Green (MG), a cationic dyed from aqueous solution. In this study, effects of operating parameters such as initial concentration of dye ...

Forestry harvesting on peats is known to result in significant losses of soil phosphorus (P) to adjacent waters, and the issue is becoming an increasingly serious concern as peatland forest stocks mature and reach harvestable age. One potential solution could be the use of low-cost P recovery techniques based on the chemical precipitation and/or adsorption of the dissolved fraction of soil P, w...

graphene, a new member of the carbon family, was used as an adsorbent due to its exceptional capability to remove rhodamine b (rb) and malachite green (mg), two organic dyes, from aqueous solutions. adsorption kinetics of rb and mg onto graphene and adsorption capacity of the adsorbent were studied. also the effects of parameters, including ph, contact time, temperature, and adsorbent dosage we...

A metal-organic framework, Zn-[2-methylimidazolate] frameworks (ZIF-8), was used as adsorbent material to remove different concentrations of oxytetracycline (OTC) antibiotic in a fixed-bed column. The OTC was studied at concentrations of 10, 25 and 40 mg L(-1). At 40 mg L(-1), the breakthrough point was reached after approximately 10 minutes, while at 10 and 25 mg L(-1) this point was reached i...

Elsebeth Schröder, Roman Fasel, and Adam Kiejna Department of Applied Physics, Chalmers University of Technology and Göteborg University, SE-41296 Göteborg, Sweden Swiss Federal Laboratories for Materials Testing and Research (EMPA), nanotech@surfaces Laboratory, Feuerwerkerstrasse 39, CH-3602 Thun, Switzerland Institute of Experimental Physics, University of Wrocław, Plac M. Borna 9, PL-50-204...

First-principles calculations using density functional theory based on norm-conserving pseudopotentials have been performed to investigate the Mg adsorption on the Si~001! surface for 1/4, 1/2, and 1 monolayer ~ML! coverages. For both 1/4 and 1/2 ML coverages it has been found that the most favorable site for the Mg adsorption is the cave site between two dimer rows consistent with the recent e...