Limited available water resources have rendered wastewater reuse an important issue to specialists in most developed countries, today. The current study works on membrane filtration for treatment of industrial wastewater. By comparing the two methods of membrane bioreactor (MBR) and hybrid membrane electro bioreactor (MEBR) processes, it finds that earlier fouling in the membrane occurs in the ...

Novel signal-processing protocols were used to extend the in situ sensitivity of ultrasonic frequency-domain reflectometry (UFDR) for real-time monitoring of microfiltration (MF) membrane fouling during protein purification. Different commercial membrane materials, with a nominal pore size of 0.2 µm, were challenged using bovine serum albumin (BSA) and amylase as model proteins. Fouling induced...

One of the main factors affecting membrane fouling in MBRs is operational conditions. In this study the influence of aeration rate, filtration mode, and SRT on hollow fiber membrane fouling was investigated using a triple fouling layers perspective. The sludge microbial population distribution was also determined by PCR method. Through various applied operational scenarios the optimal condition...

Membrane fouling is a major drawback of reverse osmosis (RO) membrane filtration as it negatively affects the quantity and quality of the permeate and lifespan of the membrane. Spacer plays a pivotal role in hydrodynamics of the membrane channel thus influencing the membrane fouling. In this study, a series of novel sinusoidal spacers that can form unobstructed sinusoidal membrane channels were...

A single-fibre microfiltration system was employed to investigate the importance of various operating and sludge property parameters to the membrane fouling during sludge filtration. The sludge was obtained from a submerged membrane bioreactor (SMBR). A series of comparative and correlative filtration and fouling tests were conducted on the influence of the operating variables, sludge propertie...

Membrane bioreactors (MBRs) have several advantages such as high-quality effluent, small footprint and less sludge production over conventional activated sludge systems, and are therefore considered to be a promising technology for future wastewater treatment. For wider use of MBRs, however, high-energy consumption in the operation of MBRs, mainly attributed to membrane fouling, needs to be add...

in the present study, the production of low-salt water from salty water by nanofiltration as well as membrane fouling was investigated. furthermore, a new method was proposed and tested experimentally for creating the backpulse in order to minimization of fouling and increase of the filtration efficiency. in the proposed method, the permeate was used instead of gas for creating the backpulse. t...

Membrane fouling is considered to be the most serious drawback in wastewater treatment when using membrane bioreactors (MBRs), leading to membrane permeability decrease and efficiency deterioration. This work aims to develop an integrated methodology for membrane fouling control, using powdered activated carbon (PAC), which will enhance the adsorption of soluble microbial products (SMP) and imp...

Membrane fouling precludes the widespread application of membrane filtration system from treating wastewater and drinking water, and occurs even under sub-critical flux operations. Hence the characteristics and behavior of membrane foulants should be thoroughly investigated, so as to find ways to reduce membrane fouling in membrane bioreactors. The purpose of this study is to compare the membra...

The modern challenges for membrane separations in a wide range of processes require more sophisticated approaches for the detection and remediation of fouling, i.e., the association of solutes, particulate matter, and colloids on and/or within a membrane. Most commonly, fouling is assessed from inferred measurements of permeation rate and/or permeate quality. The use of acoustic techniques for ...