Monte Carlo calculations are frequently used to analyse a variety of radiological science applications using low-energy (10-1000 keV) photon sources. This study seeks to create a low-energy benchmark for the MCNP Monte Carlo code by simulating the absolute dose rate in water and the air-kerma rate for monoenergetic point sources with energies between 10 keV and 1 MeV. The analysis compares four...

Analyses of radiation fields resulting from a deuterium-tritium (DT) plasma in fusion devices is critical input to the design and validation many aspects reactor design, including, shielding, material lifetime remote maintenance requirements/scheduling. Neutronics studies, which perform in-depth analysis are typically performed using transport codes such as MCNP, TRIPOLI, Serpent, FLUKA OpenMC....

Heat conduction [1] is usually modeled as a diffusion process embodied in heat conduction equation. The traditional numerical methods [2, 3] for heat conduction problems such as the finite difference or finite element are well developed. However, these methods are based on discretized mesh systems, thus they are inherently limited in the geometry treatment. This chapter describes the Monte Carl...

A non destructive technique based on gamma spectrometry and application of the Monte Carlo method for detector efficiency calibration, was used to assay radioactive content waste drums. Exploranium GR-130 miniSPEC portable gamma ray spectrometer was used to externally monitor radioactive waste drums containing ion exchange resin waste from the water demineralization system of GRR-1 open pool-ty...

Nuclear logging is one of most important logging services provided by many oil service companies. The main parameters of interest are formation porosity, bulk density, and natural radiation. Other services are also provided from using complex nuclear logging tools, such as formation lithology/mineralogy, etc. Some parameters can be measured by using neutron logging tools and some can only be me...

background: an effective method for management of large and bulky malignant tumors. this treatment modality is also known as specially fractionated radiation therapy (sfrt). in this treatment technique a grid block converted the open radiation field into a series of pencil beams. dosimetric characteristics of an external beam grid radiation field have been investigated using experimental and mo...

Abstract The contents and distribution of radionuclides in activated metallic wastes are major concerns while designing a leaching model safety case. This study investigated 60 Co as typical activation product the lower tie plate (i.e., stainless steel endpiece BWR fuel assembly) irradiated for 35.0 GWd/tHM burnup, using imaging (IP) method. calculations coupled with Monte Carlo burnup neutron ...

Abstract Radioactive mercury waste constitutes a significant challenge, as no approved disposal concept yet exists for such in Germany. This work describes decontamination and measurement procedure possible clearance of from nuclear facilities release into reuse or conventional hazardous to reduce the amount repository. The setup were developed evaluated including Monte-Carlo N-Particle® Transp...

Background: In treating patients with radiation, the degree of accuracy for the delivery of tumor dose is recommended to be within ± 5% by ICRU in report 24. The experimental studies have shown that the presence of low-density inhomogeneity in areas such as the lung can lead to a greater than 30% change in the water dose data. Therefore, inhomogeneity corrections should be used in treatment pla...