OBJECTIVE To determine the shear strength of BioGlue Surgical Adhesive (Cryolife Inc, Kennesaw, Georgia) for use in periosteal fixation in endoscopic browplasty. METHODS In a controlled design, the shear strength of periosteal attachment to native bone and that of dissected periosteum affixed to bone with BioGlue surgical adhesive was physiologically determined. Twenty-one periosteum and bone...

Human intervertebral disc specimens were tested to determine the regions of largest maximum shear strain (MSS) experienced by disc tissues in each of three principal displacements and three rotations, and to identify the physiological rotations and displacements that may place the disc at greatest risk for large tissue strains and injury. Tearing of disc annulus may be initiated by large interl...

the effect of mixing on rheological behavior of 6% wt epoxy-clay nanocomposites was studied. the mixing processes were carried out by low shear mixer, homogenizer and ultrasonic and combination of different mixing techniques at medium and maximum power. all these methods led to intercalated structure. the xrd results showed that the ultrasonic has the best effect on dispersion while a low shear...

Shear-wave polarization analysis has been performed on data from twelve earthquakes recorded in central Italy. These data are part of a set of high quality seismograms recorded by a three-component digital network installed in Abruzzo region after a Ms = 5.8 earthquake on 7 May 1984. Analysis performed on 2 to 6 Hz bandpass-filtered seismograms reveals shear-wave splitting. In order to determin...

Dynamic responses of adhesively bonded tubular joints subjected to a harmonic axial load were evaluated with the use of a shear lag model. Adherents were assumed to be elastic and the adhesive was taken to be a viscoelastic material. Effects of tubular joint geometries, material properties and adhesive properties on the dynamic response of the system were investigated. The results showed that t...

The effect of hydrodynamic shear force on the nitrogen removal performance of anaerobic ammonium oxidation (anammox) granules was studied in four batch-type Expanded Granular Sludge Bed (EGSB) reactors. The reactors were operated under different hydrodynamic shear force (0.021, 0.024, 0.026 and 0.029 N m, respectively) by control the circulation flow rate. The results showed that nitrite and am...

Room temperature (TR) elastic constants and compressive yield strengths of approximately 30 metallic glasses reveal an average shear limit gammaC=0.0267+/-0.0020, where tauY=gamma CG is the maximum resolved shear stress at yielding, and G the shear modulus. The gammaC values for individual glasses are correlated with t=TR/Tg , and gamma C for a single glass follows the same correlation (vs t=T/...

ABSIRAcr To identify the hemodynamic mechanisms associated with recurrence of intracranial aneurysms following the treatment with balloon or coil occlusion. Pulsatile flow in a terminal recurrent intracranial aneurysm was numerically simulated based on the physiological pulsatile flow observed in the middle cerebral artery. In order to quantify the reason for recurrence of terminal aneurysm. fl...

BACKGROUND AND AIM OF THE STUDY In-vitro studies on the ATS heart valve have indicated that valve opening is less in an expanding conduit than in a straight conduit. METHODS Bileaflet valve behavior was studied using a new computational fluid-structure interaction model. A three-dimensional model of the ATS valve was studied in two geometries, simulating the valve in a geometry with sudden ex...

STUDY DESIGN A comparison of cervical facet capsule strain fields in cadaveric motion segments exposed to whiplash-like loads and failure loads. OBJECTIVES To compare the maximum principal strain in the facet capsular ligament under combined shear, bending, and compressive loads with those required to injure the ligament. SUMMARY OF BACKGROUND DATA The cervical facet capsular ligament is th...