The aim of this work was to study the biodegradation of different types of automotive lubricant oils adapted to the aqueous medium using a base inoculum and an aqueous inoculum. Four treatments were carried out in two consecutive and similar experiments: T1 (control); T2 (half-synthetic oil); T3 (mineral oil); T4 (used oil). The results showed the following decreasing order of CO2 production in...

Inspired by the long-term effectiveness of living antifouling materials, we have developed a method for the self-replenishment of synthetic biofouling-release surfaces. These surfaces are created by either molding or directly embedding 3D vascular systems into polydimethylsiloxane (PDMS) and filling them with a silicone oil to generate a nontoxic oil-infused material. When replenished with sili...

BACKGROUND Stylets are the most frequently used devices for tracheal intubation, but can be a source of postoperative pharyngeal pain or hoarseness. In this study, we evaluated extraction forces between polyvinyl chloride (PVC) and stannum (Sn) stylets with various lubricants. FINDINGS Using a manikin, we compared extraction forces between PVC and Sn stylets under four different conditions: w...

The study was conducted to develop castor oil – graphite lubricants for cold extrusion of aluminium alloy and to investigate the effect of the developed lubricant on the extrusion pressure of aluminium alloy. Cold extrusion process at a constant extrusion ratio of 1.25:1 was used on 14mm diameter by 30mm long aluminium alloy billets. Experimental results showed that onset pressure ranges from 1...

In the present study, a modified Reynolds equation including the electrical double layer (EDL)-induced electroviscous effect of lubricant is established to investigate the effect of the EDL on the hydrodynamic lubrication of a 1D slider bearing. The theoretical model is based on the nonlinear Poisson-Boltzmann equation without the use of the Debye-Hückel approximation. Furthermore, the variatio...

This paper investigates the effect of contact geometry, temperature and displacement amplitude on the fretting behaviour of an aero-turbo oil lubricated cylinder-on-flat contact. To be effective, the lubricant needed both to penetrate the contact and then offer protection. Lubricant penetration into the fretting contact is found to be controlled by two physical parameters, namely (i) the width ...

We present molecular dynamics results for the interaction between two solid elastic walls during pull-off for systems with and without octane (C(8)H(18)) lubricant. We used two types of substrate--flat and corrugated--and varied the lubricant coverage from approximately 1/8 to approximately 4 ML (monolayers) of octane. For the flat substrate without lubricant the maximum adhesion was found to b...

The revolution in industrialization throughout the world has boosted the utilization of machinery and shifted the muscle power to machines. The use of machines in various sectors has increased the demand of petroleum based lubricants. Lubricants act as an antifriction media, facilitating smoother working, reducing the risks of undesirable frequent failures and maintaining reliable machine opera...

The development of new gearbox designs, the quality requirements as well as the growing ecology consciousness influenced the development of synthetic transmission gear oils with extended replacement interval. Monitoring of lubricant operating properties in the application and the analysis of the gained results provide the lubricant replacement at the right time. In this way the costs of lubrica...