Effect of the addition of various inoculants on the morphology and mechanical properties of low C-Mn and low alloy steel samples is studied by thermal and mechanical processing of the samples after solidification. According to the results obtained from metallographic studies with the electron microscope and microanalysis with x-rays, the distribution of inoculating agents in the steel matrix is...

A model is developed to calculate the composition of reoxidation inclusions that form during pouring of steel castings. The software package Thermo-Calc is used to obtain the inclusion phase fractions and compositions as a function of the temperature and oxygen content of the steel. Oxygen is assumed to be continually absorbed by the steel until the liquidus temperature is reached. Both lever r...

In this study, the grindability of cast magnetic alloys (Fe-Pt-Nb magnetic alloy and magnetic stainless steel) was evaluated and compared with that of conventional dental casting alloys (Ag-Pd-Au alloy, Type 4 gold alloy, and cobalt-chromium alloy). Grindability was evaluated in terms of grinding rate (i.e., volume of metal removed per minute) and grinding ratio (i.e., volume ratio of metal rem...

ABSTRACT Although traditional Fenton reaction is known for a long time, it is still a perspective method for removal of pollution from wastewater. Applications of electro-Fenton oxidation are commonly used in wastewater treatment. These methods are classified into groups-electrochemical advanced oxidation processes. Typical catalysts for these technologies are Fe2+ ions. Comparison between two ...

V. Aleksić, Institute for Testing Materials-IMS Institute , Belgrade, Serbia, M. Dojčinović, Lj. Milović, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, I. Samardžić, University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Croatia. This paper presents the research into behaviour of HSLA steel affected by cavitation. The parent material (PM) and s...

J. Jaworski, T. Trzepieciński: Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Rzeszów, Poland This paper presents the results of research on the determination of the coefficient of thermal conductivity and hot hardness of cutters made of selected grades of low-alloy high-speed steels, HS 6-5-2 and HS3-1-2. The investigations of hot hardness and yield stress...

Dental alloys as CoCrMo, SS 316L stainless steel and NiTi were electrochemically investigated in artificial Fusayama saliva, unmodified and modified with two different concentrations of natrium fluoride. Electrochemical tests include measurements of open circuit, measurements of linear polarization, potentiodinamic polarization curves and electrochemical impedance spectra. The best electrochemi...

There have been considerable efforts to create welding consumables which on solid state phase transformation partly compensate for the stresses which develop when a constrained weld cools to ambient temperatures. All of these efforts have focused on structural steels which are ferritic. In the present work, alloy design methods have been used to create a stainless steel welding consumable which...