damping of a full-scale cable with a pair of passive–on magnetorheological (mr) dampers was tested. a cable of 215.58m long with the first mode frequency of 0.658hz was tensioned horizontally in cable prefabrication factory. two mr dampers were attached to the cable in an angle in the plane perpendicularly to the cable axis in 5m length from the cable anchorage. the applied voltage level was 0v...

In this paper, vibrations and bifurcation of a damped system consists of a mass grounded by linear and nonlinear springs and a nonlinear damper is studied. Nonlinear equation of motion is derived using Newton’s equations. Approximate analytical solutions are obtained using multiple time scales (MTS) method. For free vibration, the approximate analytical results are compared with the numerical i...

A new self-powered magnetorheological (MR) damper control system was developed to mitigate cable vibration. The power source of the MR damper is directly harvested from vibration energy through a rotary permanent magnet direct current (DC) generator. The generator itself can also serve as an electromagnetic damper. The proposed smart passive system also incorporates a roller chain and sprocket,...

this paper presents a nonlinear model of a clamped-clamped microbeam actuated by an electrostatic load with stretching and thermoelastic effects. the frequency of free vibration is calculated by discretization based on the differential quadrature (dq) method. by separating the real and imaginary parts of frequency, the quality factor of thermoelastic damping is calculated. both the stretching a...

in this paper free vibration analysis of two rectangular isotropic plates, which are connected to each other by two translational and rotational springs along the edges, are investigated. the equation of motion and associated boundary and continuity conditions are derived using the extended hamilton principle. to solve the eigenvalue problem, the ritz method is utilized. numerical investigation...

in the present study, vibration of cylindrical laminates with different layers and angles were studied. in order to actuate and polarize in radial direction, a piezoelectric layer was located at outer surface of composite shell. laminates were assumed long enough so that plane strain state analysis in 2d can be used properly. in order to satisfy the boundary conditions, variables in terms of fo...

plates and shells are the significant structural components for many engineering and industrial applications. in this study, free vibration analysis of annular plates is investigated. for this, two different numerical methods such as differential quadrature and discrete singular convolution methods have been performed for numerical simulations. frequency values have been obtained via these two ...