The effective removal of heavy metals from aqueous wastes is among the most important issues for many industrialized countries. Removal of arsenic (As) from aqueous solutions was studied using Rhazia stricta biomass. The batch experiments are carried out to investigate the effect of the significant process parameters such as pH, contact time, solute concentration and adsorbent dose. The optimum...

The adsorption of methyl tert-butyl ether by granular activated carbon was investigated. The experimental data were analyzed using the Freundlich isotherm and the Langmuir isotherm. Although equilibrium data were found to follow Freundlich isotherm model, it were fitted better by the Langmuir model with a maximum adsorption capacity of 204.1 mg/g. The kinetic data obtained at different concentr...

in this study, nano-tio2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. the effects of ph, initial chloroform concentration and nano-tio2 dosage were also investigated. optimal conditions for chloroform removal by nano-tio2 have been then identified. results of equilibrium experiments showed that the...

Chemically modified kenaf core fibres were prepared via esterification in the presence of citric acid (CA). The adsorption kinetics and isotherm studies were carried out under different conditions to examine the adsorption efficiency of CA-treated kenaf core fibres towards methylene blue (MB). The adsorption capacity of the kenaf core fibres increased significantly after the citric acid treatme...

Polyaniline titanotungstate (PATiW) was synthesized by the sol-gel method. Adsorption isotherm studies of Cs from aqueous solution are described. Elemental Composition, chemical solubility, ion-exchange capacity (IEC) and pH titration are studied. Distribution coefficients (Kd) for ten metal ions have been determined. It was found that the polyaniline titanotungstate has high affinity and high ...

The ability of Clinoptilolite powder to adsorb Ni (II) ions from wastewater which was taken from a nickel plating factory was investigated through batch experiments. The Ni (II) adsorption was found to be dependent on mass of adsorbent, contact time, pH value of solution and the speed of agitation. The experimental isotherms data were fitted into Langmuir and Freundlich models. The monolayer ad...

Microwave stabilized heavy metal sludge was used as an adsorbent to remove the copper ions from aqueous solution. The adsorption characteristics of copper on the stabilized-sludge were studied by various models, such as Freundlich and Langmuir isotherm equation. Results show that the pH(zpc) of stabilized-sludge was at 9.2-9.5. Moreover, the adsorption of copper ions onto the stabilized-sludge ...

The low-affinity interaction between human serum albumin (HSA) and Diclofenac sodium (DCF) was studied using NMR techniques. Both 13C-NMR chemical shift and linewidth show that the dichlorophenyl ring in DCF molecule plays a primary role in its interaction with HSA. Langmuir adsorption isotherm was applied to evaluate the association constant K and the number of binding sites n of the drug/HSA ...

The potential of activated carbons--powdered (PAC) and granular (GAC), for the adsorption of acrylonitrile (AN) at different initial AN concentrations (50<or=C(0)<or=500 mg/l) from aqueous solutions was studied over the temperature range of 303-333 K. The effect of adsorbent dosage, initial AN concentration, contact time, and the change in pH with addition of adsorbents on adsorption was studie...

A new chelating resin was prepared by coupling Amberlite XAD-4 with alizarin red-s through an azo spacer, characterized by infra-red spectroscopy and thermal analysis and studied for Rh(III) preconcentration using inductively coupled plasma atomic emission spectroscopy (ICP-AES) for rhodium monitoring in the environment. The optimum pH for sorption of the metal ion was 6.5. The sorption capacit...