in this study, removal of acid blue 62 from aqueous solution by mesoporous silicate mcm-41 modified by aminopropyltriethoxysilane (aptes) composite was studied. properties of synthesized composite were analyzed and confirmed by sem, edx and ftir. results show that langmuir adsorption isotherm has the best compatibility with the results of experiments. kinetic analysis using pseudo-first-order m...

ginger waste material (gwm) has been utilized as adsorbent for removal of hazardouspatent blue vf (pbvf) dye from aqueous solution. batch adsorption experiments wereperformed as a function of ph, contact time, dye concentration, adsorbent dose and temperature.the optimum ph required for the maximum adsorption was found to be 2. the experimentalequilibrium adsorption data were tested using langm...

in this study, a series of laboratory tests were conducted to investigate the efficiency of hydroxyapatite (1-iap)nanopowders towards adsorption of lysozyme from aqueous solution. in the present research. i rp nanopowderssynthesized from egg-shell characterized using sem and ft-ht. the adsorption of lysozyme was i mg/ml using0.1 g adsorbent in 100 ml of lysozyme solution. adsorption data were f...

the effective removal of dyes from aqueous wastewaters is among the most important issues formany industrialized countries. removal of congo red (cr) dye from aqueous solutions was studiedusing nickel oxide nanoparticles. the operating variables studied were initial ph of solution,adsorbents dosage, temperature and contact time. the morphological information of nickel oxidenanoparticles were ch...

The objective of this study was to determine the performance of modified commercial powdered activated carbon (MCPAC) in removal of ammonia from aqueous solution. The effects of adsorbent dosage (0.5–1.5 g/L), ammonia concentration (100–200 mg/L), pH (3 to 9) and contact time (2 to 120 min) were examined. In this study, experiments were performed based on Response Surface Methodology (RSM). The...

hydrothermal synthesis of nickel-chitosan hybrid  has  been accomplished using ni(ch3coo)2,4h2o, chitosan and water as starting material, template and solvent respectively, followed by calcination at 800 and 900˚c to provide nanoporous nio800  and nio900. the solid products were characterized by x-ray diffraction (xrd), nitrogen adsorption-desorption, scanning electron microscopy (sem) and four...

the present study was carried out to investigate the potential of carboxylate group functionalized multi-walled carbon nanotubes (mwcnt−cooh) adsorbent for the removal of methyl orange (mo) textile dye from aqueous solutions. the effects of ph, shaking time and temperature on adsorption capacity were studied; the contact time to obtain equilibrium at 298 ˚k was fixed at 25 min. the effect of te...

in this study metal oxide nano powder namely nio nanopowder was prepared .the producedmetal oxide was characterized and used as potential adsorbent for the removal of pb and zn from aqueoussolution. the rate of uptake of the pb and zn are rapid in the beginning and the time required for equilibrium adsorption is 120 min .the time of equilibrium as well as time required to achieve a definite fra...

Background: Synthetic dyes are serious pollutants and wide ranges of methods have been employed for their removal from aquatic systems. We studied the adsorption of "Nile blue A" (NBA), an anionic dye, from aqueous solution by oxidized multi-walled carbon nanotubes (MWCNTs). Methods: Scanning electron microscope and Fourier transform infrared spectroscopy were used to characterize ...