Abstract Ferrous alloys are employed in a range of fields, including aerospace, construction, automobiles and chemical processing. One the most used welding processes for fusion ferrous metals is gas tungsten arc (GTA) or Tungsten Inert Gas (TIG) welding. Due to lower amount penetration accomplished using only one pass, less frequent some industrial situations. Fluxes have been discovered impro...

In fusion arc welding the final weld shape is influenced by welding parameters, mode of metal transfer, number of welding wires used and their arrangement in the contact tube, type of material to be welded, type of shielding medium and similar. In some articles, descriptions of investigations on the influence of the kind of material and the type of shielding medium used on the weld shape and si...

This research paper presents hardness, structure and tensile strength analysis of 1460 alloy Al-Cu-Li system, welded joints made by Tungsten Inert Gas (TIG) welding Friction Stir Welding (FSW). Characteristics acoustic noise at the operator workplace during mechanized TIG FSW aluminium-lithium with purpose to develop recommendations for improvement health safety processes were studied. Analyzin...

Tungsten Inert Gas (TIG) welding is a widely applied manufacturing process. Angular distortion is a major problem and most pronounced among different types of distortion in the butt welded plates. This angular distortion is mainly due to nonuniform transverse shrinkage along the depth of the plates welded. Restriction of this distortion by restraint may lead to higher residual stresses. However...

Abstract Hastelloy C-276 is a nickel-based alloy with high strength and corrosion resistance at cryogenic to temperatures. The issue of shallow penetration by Tungsten Inert Gas (TIG) welding was addressed in the current investigation applying A-TIG variable oxide flux. In investigation, constant conditions were used perform TIG using SiO 2 , TiO 50% mixture + weld bead width depth profile meas...

Applying non-uniform heat in welding causes residual stress and distortion, which affects the life of components. In present study, distortion Duplex 2205 stainless steel A-TIG were investigated numerically experimentally. The optimal parameters for highest penetration depth welded samples obtained Uncoupled thermal-mechanical analysis using ABAQUS 2017 software has been done. Goldak's measured...

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for ...

Abstract Tungsten inert gas (TIG) welding is frequently used to fabricate super duplex stainless steel weldments due its superior mechanical qualities and attractive appearance in contrast with other arc techniques. The broad use of TIG remains constrained despite all advantages. Thus, the process activated flux tungsten (A-TIG) created. In current study, ATIG different oxide fluxes execute bea...

in this paper, a three-dimensional finite element model has been developed to simulate the laser-tig hybrid welding (hlaw) of stainless steel 1.4418 with thickness of 4 mm. transient temperature profile and dimensions of the fusion zone and heat affected zone (haz) during welding process are calculatedusing finite element method (fem) and were solved in the abaqus/standard software.the heat sou...