Seasonal weather variations have a profound effect on the integrity of cohesionless soil slopes in Canadian Prairies owing to prevalent semi-arid continental climate. The primary contribution this research is development transient and two-dimensional stability model that fully coupled with hydraulic thermal flows. was used predict factor safety (FS) for two slope geometries (18 m height 26 heig...

One concern for recycle and reuse of scrap tires is the leaching of tire constituents (organic and inorganic) with time, and their subsequent potential harmful impacts in environment. The main objective of this study was to examine the leaching of dissolved organic carbon (DOC), dissolved nitrogen (DN), and selected inorganic constituents from scrap tires. Different sizes of tire chips and crum...

The leaching reaction kinetics of weathered crust elution-deposited rare earth with mixed ammonium salts was studied. The in uence of concentration of reagents and particle size of ore on leaching rate was investigated. The results showed that the di usion process and leaching rate could be improved by increasing reagents concentration and decreasing leaching owing rate and particle size. The l...

Reclamation of sodic soils has traditionally been undertaken using calculation of gypsum or Ca requirement assuming 100% exchange efficiency and neglect of the contribution of calcium carbonate in the profile. The UNSATCHEM model is reviewed and then evaluated for its ability to predict field reclamation of a sodic saline soil. The 40-ha field site was initially at an electrical conductivity (E...

Quasi-dynamic leaching characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from raw and solidified air pollution control (APC) residues were examined via a nine-time multiple leaching test. The effect of injected activated carbon in the APC residues on the PCDD/F leachability was also evaluated. When humic acid solution was used as a leachant, the leaching concentra...

In this study various leaching technologies were applied to extract heavy metals from sludge from the printed circuit board process. These methods included traditional acid extraction (TAE) and microwave assisted treatment (MAT). The target heavy metal was copper. Experiments were performed to determine the acid the leaching efficiency by changing operating conditions, including acid type and c...

A novel energy-saving hydrometallurgical recovery process for copper from electronic scrap employing the Cu(I)-ammine complex has been presented on the basis of a thermodynamic consideration. In order to experimentally explore the feasibility of the leaching stage in this process, the copper leaching behavior from a printed circuit board (PCB) in ammoniacal alkaline solutions has been investiga...

Remediation of heavy metal polluted sediment by extracting the metals with sulfuric acid can be performed as follows: abiotic suspension leaching, microbial suspension leaching, abiotic solid-bed leaching, and microbial solid-bed leaching. Abiotic leaching means that the acid is directly added, while microbial leaching means that the acid is generated from sulfur by microbes (bioleaching). Thes...