نتایج جستجو برای: injection speed
تعداد نتایج: 360819 فیلتر نتایج به سال:
Magnetic abrasive finishing (MAF) is a micromachining process that uses magnetic field and magnetic abrasive particles to conduct the mechanism of material removal in micro-nanometer scales. In this paper, by an experimental method and statistical analysis, the effects of parameters like working gap, work-piece rotational speed and material removal mechanism (injection of abrasive slurry of Al<...
Magnetic abrasive finishing (MAF) is a micromachining process that uses magnetic field and magnetic abrasive particles to conduct the mechanism of material removal in micro-nanometer scales. In this paper, by an experimental method and statistical analysis, the effects of parameters like working gap, work-piece rotational speed and material removal mechanism (injection of abrasive slurry of Al<...
in this work, the feasibility study for design of a laboratory sample rde which has an annular geometry with diameter of 76 mm and length of 101 mm has been performed. detonation engines are expected to be used as propulsion system in aerospace applications in the future. several types of detonation engines are currently under examination, including the rotating detonation engine (rde). first, ...
The present study focuses on the effect of air-fuel ratio on the performance of four cylinder hydrogen fueled direct injection internal combustion engine. GT-Power was utilized to develop the model for direct injection engine. Air-fuel ratio was varied from rich limit to a lean limit. The rotational speed of the engine was varied from 1250 to 4500 rpm. The acquired results shown that the air fu...
This paper presents nonlinear optimization based position and speed estimation scheme for IPMSM drives with arbitrary signal injection generated by inherent switching ripples associated with finite control set model predictive control (FCSMPC). The existing standard sensorless techniques are not suitable for FCSMPC which applies voltage vectors directly to an electrical machine without a modula...
This study aims to investigate the dynamics characteristics of liquid jet injected from a needle-free injection device by analyzing the the flow visualization from the high-speed video camera and the CFD calculation. This is to investigate the jet flow phenomena (e.g. penetration, dispersion, velocity) in the quiescent air and in the tissue simulant (20% polyacrylamide gel) as the further infor...
The effect of variable water injection timing on performance and emission characteristics of hydrogen fueled compression ignition (HFCI) engine has been investigated and the results are presented in this paper. In this study, water is injected from 20 BTDC to 20 ATDC with injection duration of 20 CA and 40 CA. Hydrogen is injected at the intake port with fixed injection timing from 0 CA to 40 C...
In this paper, a new sensorless model reference adaptive method is used for direct control of active and reactive power of the doubly fed induction generator (DFIG). In order to estimate the rotor speed, a high frequency signal injection scheme is implemented. In this study, to improve the accuracy of speed estimation, two methods are suggested. First, the coefficients of proportional-integral ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید