The main objective of this study was to prepare sustained release metformin hydrochloride microcapsules by the Wurster fluidized bed and to obtain the optimized coating process and formulation. Fine microcapsules without agglomeration were obtained in a continuous coating process with the atomization air pressure of 0.2Mpa and an appropriate coating speed temperature. With other design variable...

The CPA's Chemical Mass Balance Receptor Model (CMB7) was used for analysis of nonmethane hydrocarbon source-receptor relationships in the Raleigh, North Carolina Metropolitan Statistical Area (MSA). Three hour integrated ambient samples collected 15 km southeast of downtown Raleigh from 5-8 AM weekdays during August, 1993 were analyzed for speeiated hydrocarbons and used as inputs in the model...

A novel in-line technique utilising pulsed terahertz radiation for direct measurement of the film coating thickness of individual tablets during the coating process was previously developed and demonstrated on a production-scale coater. Here, we use this technique to monitor the evolution of tablet film coating thickness and its inter-tablet variability during the coating process under a number...

In this study the bioactivity of hydroxyapatite/poly(ε-caprolactone)–poly(ethylene glycol) bilayer coatings on Nitinol superelastic alloy was investigated. The surface of Nitinol alloy was activated by a thermo-chemical treatment and hydroxyapatite coating was electrodeposited on the alloy, followed by applying the polymer coating. The surface morphology of coatings was studied using FE-SEM and...

We aimed to embed silica optical fibers in composites (epoxy vinyl ester matrix reinforced with E-glass unidirectional fibers in mass fraction of 60%) in order to further monitor the robustness of civil engineering structures (such as bridges). A simple system was implemented using two different silica optical fibers (F1-double coating of 172 µm diameter and F2-single coating of 101.8 µm diamet...

composite electrodeposition is a low-cost and low-temperature method, which is used to make metal matrix composite coatings. in this study the surfactant of anionic(sds) and cationic (ctab) is used as additive in composite coating of ni/tin. the results showed that the anionic surfactant caused more particles in the composite coatings. increasing sds concentration to the optimal value leads to ...

Powder particle coating is the most important techni It has constantly being refined and modified since last four decades. There numerous applications of coating, including drug layering, modified release coating, physical and chemical protection, aesthetic purpos identification of drugs. Various coating techniques from conventional pan coating to laser assisted solvent free techniques have bee...

to improve the corrosion protection of copper metal, 0.01m concentration of 1h-1,2,4-triazole-3-thiol (tat) was incorporated into the hybrid sol-gel monolayers containing 3-glycidoxypropyltrimethoxysilane (gptms) and tetraethoxysilane (teos). it was further subjected to hydrolysis and condensation reaction to form a sol-gel matrix. the tat-doped hybrid sol-gel coating was applied over the coppe...

nanosized tio2 particles were prepared by sol–gel method. the tio2 particles were co-deposited with chromium using electrodeposition technique. in investigating of coating surfaces by scanning electron microscope (sem), the results showed that the morphology of the coating surface was changed by adding tio2 nanoparticles to the chromium coating. the corrosion behavior of the coatings was assess...

Slot die coating technology is a function of the coating process, auxiliary system and fundamental technique. The decision to utilize a coating technology needs to be analyzed against these functions to determine best fit. In the era of clean, thin and precise converting operations, a customized coating system is necessary to have a technical edge. Building the system from the material up to th...