In this study, a 3D combustion chamber was simulated using FLUENT 6.32. Aims to obtain accurate information about the profile of the combustion in the furnace and also check the effect of oxygen enrichment on the combustion process. Oxygen enrichment is an effective way to reduce combustion pollutant. The flow rate of air to fuel ratio is varied as 1.3, 3.2 and 5.1 and the oxygen enriched flow ...

0016-2361/$ see front matter 2012 Elsevier Ltd. A doi:10.1016/j.fuel.2012.01.042 ⇑ Tel.: +90 262 3032285; fax: +90 262 3032203. E-mail address: [email protected] Homogeneous charge compression ignition (HCCI) combustion mode has some benefits compared to the most popular conventional combustion forms used in the internal combustion (IC) engines: spark ignition (SI) and compression igni...

Abstract   A new micro combustion concept is described in this work by introducing a new terminology in the micro combustion. The effects of Area to Volume Ratio (AVR) of the micro-combustors were studied to find the best performance of designed micro-combustors. In order to test the feasibility of the designed micro combustors before the actual experiment is conducted, simulation work was perf...

In this work, the potential of auto-ignition of heavy oil during in-situ combustion (ISC) process was studied. Kinetic studies were carried out using Thermo Gravimetric Analyzer (TGA), Differential Scanning Calorimetry (DSC) and Accelerating Rate Calorimetric (ARC) techniques. Effects of oxygen partial pressure, reservoir pressure and clay on auto ignition condition were investigated on a n...

Volumetric combustion has been developed to realize a high substitution ratio of biomass in co-firing boilers, which features an intensive flue gas internal recirculation inside furnace. However, the characteristics of NOx and SOx emissions in large-scale boilers with volumetric combustion were not fully clear. In this paper, an Aspen Plus model of volumetric combustion system was built up base...

TThe present paper evaluates the plan of combustion air pre-heater installation on the fired heater from thermodynamics and thermos-economics point of view. As a real case study, one of the fired heaters (H_101) of Distillation unit in Tehran Oil Refinery, Iran, is intended. With applying an air pre-heater in this study, flue gases temperature falls down from 430 ºC to 200ºCand combustion a...

Blast furnace gas is the byproduct of smelting steel production process, and is the important secondary energy source. It is can be used as fuel for engines to generate electricity for most middle and small steel enterprises. In order to understand the combustion mechanism and provide the basis for the design of blast furnace gas engine,premixed laminar combustion experiments of the blast furna...

Indoor air quality (IAQ) in the use of combustion appliances is important for adequate evaluation of air pollution health risks. Since people spend most of their time inside buildings, especially the elderly and children, their exposure to indoor air contaminants can increase health problems in the community. Combustion materials emitted from combustion space heating appliances in housing durin...

in the present study the adiabatic temperature of gaseous fuels were calculated and the influence of effective parameters of flame temperature was discussed. firstly, a new computational program named ftc (flame temperature calculations) was prepared to calculate the adiabatic flame temperature and then the effect of initial temperatures of combustion air and fuel, excess air content and oxygen...

Combustion synthesis is a special thermophysico-chemical process applied for production of intermetallic compounds. In the present work, a reaction–diffusion numerical model was developed to analyze the combustion synthesis of aluminide intermetallics by self-propagating high-temperature synthesis process. In order to verify the reliability of the numerical model, an experimental setup was desi...