heat exchangers are the critical components of refrigeration and liquefaction processes. selection of appropriate operational conditions for cryogenic recuperative heat exchanger and expansion valve operating in joule-thomson cooling system results in improving the performance and efficiency. in the current study, a straightforward procedure is introduced to design an efficient joule-thomson co...

in the presented research, heat transfer of a mobile electrolyte alkaline fuel cell (afc) (which the electrolyte has cooling role of system) has been considered. proper control volumes of system with specific qualification have been chosen. consequently, heat and mass transfer in control volumes have been assessed. considerations on them and contributed models lead to approve a double tube heat...

A manufacturing process plan was developed for a welded condenser utilizing a sintered wick. Electronic devices have progressed to the point where new designs are limited by the thermal management system used to ensure safe operating temperatures. Coupling the effects of high surface area of multiple condensers, the low thermal resistance of loop heat pipes, and the increased dissipation rates ...

the objective of the present study is the synthesis of mwcnt-tio2 hybrid nanostructures by solvothermal synthesis method with ticl4 as precursor. the heat transfer enhancement due to the use of mwcnt-tio2 nanofluid was investigated. as-prepared hybrid materials were characterized by x-ray diffraction (xrd) and scanning electron microscopy (sem). the results showed that mwcnts were uniformly dec...

BACKGROUND Ground source heat pumps is a building energy conservation technique. The underground buried pipe heat exchanging system of a ground source heat pump (GSHP) is the basis for the normal operation of an entire heat pump system. METHODS Computational-fluid-dynamics (CFD) numerical simulation software, ANSYS-FLUENT17.0 have been performed the calculations under the working conditions o...

Experimental investigations of heat transfer coefficient of CuO/Water nanofluid are reported in this paper. The heat transfer coefficient of the CuO/water was measured with the help of double pipe heat exchanger. The nanofluid was prepared by dispersing a CuOnano particle in deionized water. CuO/water nanofluid with a nominal diameter of 27nm at different volume concentrations (0.1 &0.3 vol.%) ...

"> Waste heat recovery is very important, because it not only reduces the expenditure of heat generation, but also it is of high...

The using of double heat pipe based heat exchanger (HPHX) in a conventional fully fresh air air-conditioning (AC) system was examined in the present study. The fabricated HPHXs were tested under the actual conditions and the measured data were used to study the performance of the existing AC system (System A) and AC system equipped with the double HPHX (System B) for a yearly operation through ...