Prosthetic eyes are artificial substitutes for the eyeball, made of heat-curing acrylic resin, serving to improve the esthetic appearance of the mutilated patient and his/her inclusion in society. The aim of this study was to assess the flexural strength of two heat-curing acrylic resins used for manufacturing prosthetic eyes. Thirty-six specimens measuring 64 x 10 x 3.3 mm were obtained and di...

This review thoroughly accumulated information regarding new technologies for state-of-the-art light curing of resin composite materials. Visible light cured resin-based composites allow the dentist to navigate the initiation of the polymerization step for each layer being applied. Curing technology was regularly subjected to changes during the last decades, but meanwhile the LED era is fully e...

Three heat resistant cross-linked PVC foam plastics were prepared and their performances were compared with universal cross-linked PVC structural foam. The results show that these three heat resistant foams have higher glass transition temperatures (close to 100 °C) than universal structural foam (83.2 °C). Compared with the universal structural foam, the three heat resistant foams show much hi...

The influence of three curing modes of a high-powered LED curing unit on temperature rise under 2-mm-thick dentin was investigated during the polymerization of resin composite samples of Admira, Filtek P60, Premise, Tetric Flow, Tetric Ceram, and Filtek Z250. Ninety standard specimens were prepared. The bonding agents and resin composites were cured with standard, pulse, or soft-start mode (n=5...

In the field of flat panel displays (FPD), packaging technology has significant influence on display performance. The electrical and mechanical interconnect between the liquid crystal displays (LCD) and its driver integrated circuit (IC) is a key issue that needs improvement to achieve finer pitch, easier assembly and greater connection reliability. With the decrease of the pixel size and the i...

Acrylic resins are used as denture base materials since 1937 (Craig, 1993) and heat-cured Poly(methyl-methacrylate) (PMMA) (Lay et al., 2004) composed by methyl methacrylate monomers chains is the most popular of them. Virtually, dentures are constructed from conventional polymer/monomer (Lay et al., 2004) processed by heat water-bath system and compression molding technique (Ganzarolli et al.,...

Ar/O2/N2 cold plasma was employed to treat the surface of heat-curing acrylic resin, and the wettability changes were evaluated. After plasma treatment, the contact angle reduced significantly. XPS results indicated that the C/O ratio reduced and a new hydrophilic group C–OH was generated on the surface of acrylic resin.

afinite element model is developed for simulation of the curing process of a thick axisymmetric rubber article reinforced by metal plates during the molding and cooling stages. the model consists of the heat transfer equation and a newly developed kinetics model for the determination of the state of cure in the rubber. the latter is based on the modification of the well-known kamal-sourour mode...