In this letter, nanocomposites based on maleic anhydride grafted high density polyethylene (HDPE-g-MA) and amine-functionalized nanodiamond (ND) were fabricated via one-step reactive melt-blending, generating a homogeneous dispersion of ND, as evidenced by transmission electron microscope observations. Thermal analysis results suggest that addition of ND does not affect significantly thermal st...

Natural fibers are used in polymer composites to improve mechanical properties to replace inorganic reinforcing agents produced by non-renewable resources. The present study investigates the tensile and flexural behaviors of palm fibers-high density polyethylene (HDPE) composite as a function of volume fraction. The surface of the fibers was treated by mercerization treatments to improve the we...

Thermogravimetric analysis was carried out to investigate the thermal degradation of High Density Poly Ethylene (HDPE) short fibers reinforced epoxy composites. Three composites with 5, 10 and 15 % by weight of HDPE short fiber composition were prepared using epoxy as matrix material. The HDPE short fiber used as reinforcing material into the resin helps in retarding the thermal degradation of ...

The efficacy of untreated and alphacypermethrin-treated high density polyethylene (HDPE) mesh against Culicoides biting midges (Diptera: Ceratopogonidae) was determined using Onderstepoort downdraught black light traps and a contact bioassay. Three traps were operated overnight in four replicates of a 3×3 randomised Latin square design near horses under South African field conditions. Both the ...

Grinded glass fiber (GGF) embedded high density polyethylene (HDPE) membranes were prepared via thermally induced phase separation method. FESEM images showed that all the membranes had leafy structure, indicating a solid-liquid mechanism during phase separation. The results of EDX and TGA analyses confirmed that the fibers were dispersed in the HDPE matrix uniformly. Normalized water flux of t...

Short carbon fiber (SCF), rice straw powder, and high-density polyethylene (HDPE) were melted, mixed, compounded into composites by compression molding. The effects of content on the mechanical properties straw-high density (RHCs) studied. fibers characterized a universal capability test machine (UCTM), scanning electron microscope (SEM), DMA dynamic analyzer, Fourier infrared spectrometer. res...

 Immobilization of Lipase produced from Rhizomucor miehei on HDPE fine powder was investigated. As compared to an aqueous system, immobilization in a non-aquous organic medium such as n-hexane was not successful and caused enzyme denaturation. Prewetting the support with ethanol increased the immobilized protein and enzyme activity as much as 31% and 34%, respectively. The maximum immobilized a...

Organic compounds such as benzene, toluene, ethyl benzene and o-, m-, and p-xylene from contaminated soil and groundwater may permeate through thermoplastic pipes which are used for the conveyance of drinking water in water distribution systems. In this study, permeation parameters of benzene in 25 mm (1 inch) standard inside dimension ratio (SIDR) 9 high density polyethylene (HDPE) pipes were ...

This research paper proposes a sustainable and feasible technique to utilize seashell waste. The utilization of seashells offers economic environmental benefits because their abundant, renewable, cheap source calcium carbonate. will reduce the hazards waste generated environment landfilling that cause risk water sources public health. Moreover, synthesized bio − CaCO3 end-product cost polymer. ...

In this study, blends based on a high density polyethylene (HDPE) and chitosan (CS) were successfully prepared by melt processing, in a laboratory internal mixer. The CS biopolymer content effect (up to maximum of 40%), and, the addition of bentonite clay modified with quaternary ammonium salt (CTAB) impregnated chitosan as a compatibilizing agent, on the properties of the blends was analyzed b...