PURPOSE This study was to evaluate the effect of grinding of the inner metal surface during the porcelain try-in stage on metal-porcelain bonding considering the maximum temperature and the vibration of samples. MATERIALS AND METHODS Ninety-one square prism-shaped (1 × 1 × 1.5 mm) nickel-chrome cast frameworks 0.3 mm thick were prepared. Porcelain was applied on two opposite outer axial surfa...

Modifying blasting practices to achieve a more suitable mill feed size – which varies according to the crushing/grinding circuit – can achieve up to a 30% increase in throughput. Following an initial benchmarking of an operation’s practices, SRK can advise on how value-added blasting will deliver improvements in both mill capacity and overall consistency of performance. SRK employs modelling to...

Objectives: This study was conducted to evaluate the effect of grinding and sandblasting on the microstructure, biaxial flexural strength and reliability of two yttria stabilized tetragonal zirconia (Y-TZP) ceramics. Methods: Two Y-TZP powders were used to produce fine grained and coarse grained microstructures. Sixty discs from each material were randomly divided into six groups of ten. For ea...

Industrial Summary : The application of modern materials in severe working environment requires that the surface integrity of ground elements should reach a high level to obtain satisfactory resistance to various external stimuli. In response, extensive attention has been paid to study this key factor such that the working reliability of ground components could be improved to the full extent. T...

A kind of 2.5-dimensional C/C-SiC composites was fabricated by using Isothermal Chemical Vapour Infiltration process (ICVI). Frictional properties of this material were evaluated by using MM-1000 under dry condition. Average dynamic friction coefficient of it was 0.16, static friction coefficient and average coefficient stability were 0.15 and 0.56, respectively. However, weight wear rate was l...

In this paper the modeling method of object entity in the environment of virtual is introduced and the three-dimensional simulation model of grinding wheel is established in Visual C++ programming language and OpenGL tool. The simulated experiment is made, which can indicate the effect of different parameters to grinding process. It proved the reliability and practicability of virtual wheel thr...

This study evaluated microstructural and crystallographic phase changes after grinding (G) and regeneration firing/anneling (R) of Y-TZP ceramics. Thirty five bars (LavaTM and Ice Zirkon) were divided: Y-TZP pre-sintered, control (C), regeneration firing (R), dry grinding (DG), dry grinding+regeneration firing (DGR), wet grinding (WG) and wet grinding+regeneration firing (WGR). Grinding was con...

Automation of grinding of metalcastings is desirable for many reasons. The major reasons are dangerous working conditions, low productivity, and inconsistency in human operations. As an approach to the automating grinding process, a gantrydriven grinding machine is proposed to manipulate an industrial hand grinder and control the grinding force applied to the work piece. To increase the materia...