gas-lift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of liquid column. they are widely used in various industrial applications such as oil extracting in petroleum industries. gas-liquid flow being the main part of the flow through these systems, flowing in vertical pipes of gas-lift pumps has different regimes namely bubbly, slug, churn an...

Abstract Gas to liquid (GTL) process involves heterogeneous catalytic chemical reactions that convert synthesis gas to hydrocarbons and water vapor. A three phase reactor, called Low temperature Fischer-Tropsch (LTFT) is commonly applied for GTL process. In this reactor the gaseous phase includes the synthesis gas, light hydrocarbons and water vapor, the liquid phase is a mixture of the h...

in order to increase the rate of gas absorption, chemical reaction in the liquid phase is considered. the purpose of this paper was to simulate gas absorption process by a liquid film over a spherical packing incorporating eddy viscosity and diffusivity. second order chemical reaction for two different cases (fast and slow) were considered. the system partial differential equations obtained was...

In order to increase the rate of gas absorption, chemical reaction in the liquid phase is considered. The purpose of this paper was to simulate gas absorption process by a liquid film over a spherical packing incorporating eddy viscosity and diffusivity. Second order chemical reaction for two different cases (fast and slow) were considered. The system partial differential equations obtained...

dynamic analysis and study of atomic force microscope in liquid environment is the main goal of this research. hydrodynamic and squeeze forces act on cantilever of atomic force microscope which works in liquid environment, so. in this paper the effect of different environmental and physical factors had studied on frequency response diagrams. the importance of frequency response analysis is stud...

This article describes an accurate subPico flowmeter bifurcatedin to liquid and gas flowrates less than 1mol/s for both MEMS/NEMS and cryogenic technology applications. The MEMS/NEMS are described as either two Gauges (instrument), or quartz fluctuating forks, even if the liquid or gas flows through an element, as well as cryogenic technology consisting of arrays of e...

Constructing phase diagram and its subsequent quality lines for lean gas condensate reservoirs is always crucial and challenging topic in reservoir fluid studies. Due to small amounts of liquid drop-outs in lean gas condensates at reservoir conditions, full experimental tracking of phase diagram and its relevant quality lines is almost impossible for lean gas condensates.On the other hand, ...

in this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. aqueous solution of 1-methyl-2-pyrrolidine (nmp) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. the morphology of fabricated membranes...

In the most application of nozzle with gas-liquid two-phase flow, the quality of mixture in exhaust of nozzle is the most important parameter as well as the flow velocity. On the other hand, in some industrial application, such as water injection in forced induction (turbocharged or supercharged) internal combustion engine the spray quality is the main goal of designing. In this case and for im...