This paper proposes a new detection system for monitoring gas concentration and flow rate. Velocity difference of ultrasonic wave in bi-directional propagation in measured gas is recorded and utilized for computing the online gas concentration and flow rate. Meanwhile, the temperature compensation, return signal processing and error analysis algorithms are applied to improve the accuracy. The e...

Gas-condensate reservoirs contain hydrocarbon fluids with characteristics between oil and gas reservoirs and a high gas-liquid ratio. Due to the large gas-liquid ratio, wellhead choke calculations using the empirical equations such as Gilbert may contain considerable error. In this study, using drill stem test (DST) data of a gas-condensate reservoir, coefficients of Gilbert equation was modifi...

Quantitative evaluation of shear stress in the vessel wall due to the presence of asymptomatic gas emboli is lacking. The goal of this work was to assess the impact of chronic asymptomatic gas emboli on the risk of atherosclerosis through a custom-built cardiovascular flow simulator. Gas bubbles were created by forced air from a syringe pump. The influences of embolism injection rate, pulse rat...

the performance of the electric submersible pump (esp) significantly affected by gas void fraction (gvf). thus, using of a rotary gas separator (rgs) is a suitable solution for this issue. the performance of the rgs is function of different parameters such as geometry of impeller, rotating speed, boundary conditions, media viscosity and gvf. in this study, the influences of gvf, viscosity, and ...

This paper investigates effects of different additives on morphology and subsequently, separation performance of asymmetric flat sheet Polyvinylidene fluoride (PVDF) membranes to separate CO2 using membrane contractor. Five different additives from different chemical families including Lithium chloride (salt), Polyethylene glycol 400 (polymer), glycerol (weak anti-solvents), methanol...

High-velocity oxygen fuel (HVOF) thermal spraying uses a combustion process to heat the gas flow and coating material. A computational fluid dynamics (CFD) model has been developed to predict gas dynamic behavior in a HVOF thermal spray gun in which premixed oxygen and propane are burnt in a combustion chamber linked to a parallel-sided nozzle. The CFD analysis is applied to investigate axisymm...

To investigate flow of gas mixtures through micro channel in detail, the tangential momentum accommodation coefficients of each species for gaseous mixtures were determined by analyzing the Couette flow problem of a slightly rarefied gas between two walls. The molecular dynamics (MD) method for the interaction of gas molecule with the wall surface is combined with the DSMC method for the motion...

residual gas saturation is one of the most important parameter in determining recovery factor of water-drive gas reservoir. visual observation of processes occurring at the pore level in micromodels can give an insight to fluid displacements at the larger scale and also help the interpretation of production performance at reservoir scale. in this study experimental tests in a glass micromodel w...

To reduce the cost of arranging air foam flooding equipment at each wellhead, a method establishing centralized injection stations is proposed. The flow pattern and resistance characteristics mixtures in different initial conditions are studied. Experimental results indicate that probability density function stratified obtained by comparing stainless steel transparent pipes. If gas–liquid ratio...