Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al2O3 and micro sized graphite particles. A mixture of Al2O3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. Packed groove was subjected to friction stir processing in order to im...

Owing to its superior mechanical properties, nanodiamond (ND) holds great potential to improve tribological characteristics of composites. In this study, we report on the wear and dry friction of epoxy-ND composites prepared from as-received and aminated ND across the length scale range from macro to nano. Comparison of macroscale, microscale, and nanoscale frictional behavior shows that ND is ...

The tribological test with Pin-On-Disc configuration measures friction and wear properties in dry or lubricated sliding surfaces of a variety of materials and coatings. Polymeric matrix composites loaded with mineral filler were used, 1%, 3%, 10%, 30%, and 50% mass percentage of filler, to reduce the material cost by using mineral tailings. Using a pin-on-disc tribometer to quantify coefficient...

Four-ball tester is a device which is used to evaluate the resistance of extreme pressure grease performance and wear resistance with simple structure, less fuel consumption and low cost. It has been widely used in Lubricants research. In this paper, the principle and testing equipment of four-ball tester are introduced. At the same time, some shortcomings such as inconvenient load mechanism an...

Original scientific paper In this paper, the results of investigations of the temperature field distribution and tool wearing during C60 steel turning are presented. Abrasive wear resistance tests were carried out for cutters made of low-alloy high-speed steel. Steel samples were heat treated, and then were subjected to ion nitriding, TiN coating, or to complex treatment. The influence of cutti...

Despite the emphasis it now receives in the marketing of self-ligating brackets, friction is not the major component of resistance to sliding in clinical treatment. Laboratory studies show that binding of the wire against the corners of the bracket, which occurs soon after tooth movement begins, is much more important than previously thought, and that notching of the archwire, which temporarily...

Nowadays titanium alloys are extensively used for aerospace and biomedical applications. However, despite good mechanical properties and excellent corrosion resistance they possess poor wear resistance and a tendency to galling and seizure. In this study the tribological properties of experimental Ti-Si-Zr based alloys were studied using a standard ball-on-disc wear testing system. The wear and...

The peak and critical state strengths of sands are linearly related to the stress level, just as the frictional resistance to sliding along an interface is related to the normal force. The analogy with frictional sliding has led to the use of a 'friction angle' to describe the relationship between strength and stress for soils. The term 'friction angle' implies that the underlying mechanism is ...

INTRODUCTION An elastomeric module with a polymeric coating has been developed to reduce the friction of sliding mechanics. This in-vitro study examined the stability of the coating and compared the frictional properties of coated modules with those of other common ligation methods. METHODS Six ligation methods (regular uncoated, slick [coated], conventional silver, easy-to-tie, silicone-impr...