Performance of an air-standard Atkinson cycle is analyzed by using finite-time thermodynamics. The irreversible cycle model which is more close to practice is founded. In this model, the nonlinear relation between the specific heats of working fluid and its temperature, the friction loss computed according to the mean velocity of the piston, the internal irreversibility described by using the c...

The pressure-flow characteristics of 100 left circumflex stenoses in 10 chronically instrumented unsedated dogs were studied under resting conditions and during pharmacological coronary vasodilation. At rest, the pressure loss (deltaP) due to a stenosis and arterial flow velocity (V) were related by the equation, deltaP = FV + SV2, where F is the coefficient of pressure loss due to viscous fric...

In this paper, we have developed a new prototype of 0.5 hp induction motor with reduced slots in rotor bar and stator core in comparison to the conventional induction motor. The conventional induction motor usually uses 30 slots of aluminum rotor bar and 36 slots in the stator core. In our developed prototype, we used 10 slots of copper rotor bar and 24 slots in the stator core. In order to eva...

Friction and wear are detrimental to engineered systems. Ultrasonic lubrication is achieved when the interface between two sliding surfaces is vibrated at a frequency above the acoustic range (20 kHz). As a solid-state technology, ultrasonic lubrication can be used where conventional lubricants are unfeasible or undesirable. Further, ultrasonic lubrication allows for electrical modulation of th...

Accumulative roll bonding (ARB) was used to fabricate the Cu-Zn multilayer and Cu-Zn solid solution. A lamellar structure with the hardness of about 130 VHN was formed after eight ARB cycles. Following to the suitable heat treatment, a solid solution with a uniform microstructure and hardness of about 57 VHN was produced. The dominant wear mechanism in the ARB processed multilayer was found to ...