Fouling of heat exchangers is a severe problem in the industrialized world. The effects of fouling are reduced energy efficiency and increased greenhouse gas emissions. In fact, any heat transfer process has a risk of fouling on the heat transfer surface. The fouling can in some cases be cleaned physically, chemically or burned off; in other cases it may not be possible to clean the heat exchan...

Membrane BioReactor (MBR) in which membrane separation process is combined with biological processes is an efficient alternative for wastewater treatment and reuse. However, the major process problem with MBRs remains the membrane fouling due to the physicochemical interactions between the membrane material and the components in the mixed liquor. Along with the fouling, membrane permeability de...

ESDU International of London, UK has recently published a ‘User Guide’ [1] on fouling in heat exchange systems using seawater as the coolant. Developed over a period of eighteen months in close collaboration with a team of oil refiners, heat transfer equipment and services suppliers and universities, with valuable input from the power industry, the User Guide is a practical guide to the current...

the propose of this paper is to introduce a new model for crude oil fouling in preheat trains of crude distillation unit. the experimental results of australian light crude oil with the tube side surface temperatures between 200-260 oc and fluid velocity ranged 0.25 to 0.4m/s were used. the activation energy of chemical reaction depends on the surface temperature has been calculated.  the model...

This paper aims to broaden a better understanding of extracellular polymeric substances (EPS) and its impact on fouling in membrane bioreactor (MBR). Some fundamental knowledge about EPS and MBR fouling was covered in this paper in several aspects including definition of EPS, evaluation of EPS, influencing factors on EPS production and responsibility of EPS on MBR fouling mechanisms.

This paper presents the results of an investigation on the effects of concentration of cations on activated sludge properties and membrane fouling in submerge membrane bioreactors. The working volume of the experimental setup was two liters. The cellulose acetate membrane was immersed in the bioreactor. The flocculability, settling properties and fouling propensity of activated sludge was measu...

The modern challenges for membrane separations in a wide range of processes require more sophisticated approaches for the detection and remediation of fouling, i.e., the association of solutes, particulate matter, and colloids on and/or within a membrane. Most commonly, fouling is assessed from inferred measurements of permeation rate and/or permeate quality. The use of acoustic techniques for ...

This paper deals with the time-optimal operation and parameter estimation problem of a general diafiltration process in the presence of fouling. Fouling stands for one of the dominant problems in the membrane separation processes. The dynamic behavior of the fouled membrane is described by a general fouling model taken from literature. An Extended Kalman filter is proposed for the recursive est...

Membrane fouling during particle filtration occurs through a variety of mechanisms, including internal pore clogging by contaminants, coverage of pore entrances, and deposition on the membrane surface. Each of these fouling mechanisms results in a decline in the observed flow rate over time, and the decrease in filtration efficiency can be characterized by a unique signature formed by plotting ...

In this study, neat HDPE and HDPE/PE-g-MA/EVA blend membranes were fabricated via thermally induced phase separation (TIPS) method and their fouling behaviors were examined using filtration of BSA protein. Membranes were characterized using FESEM, AFM, ATR-FTIR analyses and porosity measurement. Fouling behavior of membranes was analyzed using the resistance-in-series (RIS), classic and combine...