Hydrocolloid from tamarillo (Solanum betaceum Cav.) puree was extracted using water and characterised for the first time. Proximate compositions of the extracted hydrocolloid were also determined. Functional characteristics such as water-holding capacity, oil-holding capacity, emulsifying activity, emulsion stability, foaming capacity and stability of the hydrocolloid were evaluated in comparis...

In this research sodium bicarbonate (NaHCO3) was introduced to generate carbon dioxide gas (CO2) to the existing nitrogen gas (N2) of elastomeric foam, to lower thermal conductivity (K). Various loadings of NaHCO3 (0 to 60 phr) were added into the azodicarbonamide (AZC)-containing compound and its properties were then determined. Two vulcanization methods, i.e., hot air and infrared (IR), were ...

The present work was aimed to examine the effects of incorporation of each of two different types of nanoclay, i.e. Cloisite Na+ and Cloisite 30B, into PVA foam on cellular morphology and water absorption capacity. Foam samples containing 0.0-10.0 wt% of each of the two types of nanoclay alone were prepared using mechanical foaming. Accordingly, PVA/organoclay/water suspensions were prepare...

The aim of this paper is to provide a perspective on the effect of gas type on the permeability of foam films stabilized by different types of surfactant and to present a critical overview of the tracer gas experiments, which is the common approach to determine the trapped fraction of foam in porous media. In these experiments some part of the gas is replaced by a "tracer gas" during the steady...

Fractured carbonate reservoirs account for 25% of world’s total oil resources and for 90% of Iranian oil reserves. Since calcite and dolomite minerals are oil wet, gas oil gravity drainage (GOGD) is known as the most influencing production mechanism. The most important issue within gas injection into fractured media is the channeling problem which makes the efficiency of gas injection process e...

in many processes polymeric foams can be produced by using chemical or physical blowing agents. in this work for polyethylene foam production, the chemical blowing agents and compression moulding process were employed. at first, by using dsc diagram of two polyethylene grades, a suitable polyethylene grade was selected for foam production and then we discuss about blowing agent critical percent...

1 MISCELLANEOUS (E.G., ARTIFICIAL SNOW) 2 FIRE-EXTINGUISHING 3 .Foam or gas phase containing 4 .Gas generative, chemically 5 ..Dry, combustion type 6 ..Low temperature chemically interreactive 6.5 ...Foam-stabilizant or colloidstabilizant containing 7 ..Carbonates or ammonium salts containing or pyrolytic 8 .Volatile or gas charged liquids containing 8.05 .Foam-stabilizant or colloidstabilizant...

BACKGROUND The vacuum-assisted closure device is widely used clinically, yet its mechanisms of action are incompletely understood. In this study, the authors designed a partially splinted full-thickness murine vacuum-assisted closure model to better understand the mechanism of action of the vacuum-assisted closure device. METHODS Full-thickness wounds (n = 10 per group) were excised in diabet...

We present the development of a new underwater laser cutting process in which a water-jet has been used along with the laser beam to remove the molten material through kerf. The conventional underwater laser cutting usually utilizes a high pressure gas jet along with laser beam to create a dry condition in the cutting zone and also to eject out the molten material. This causes a lot of gas bubb...

Cobalt modified nickel phosphide nanosheet arrays on foam (Co-Ni 2 P/NF) can be used as a bifunctional electrocatalyst for PET hydrolysate electroreforming-assisted water splitting, and achieve 10 mA cm −2 at voltage of 1.43 V.