The recent development in oil and gas industry increases the production and consumption of oil. The enormous amount of oily wastewater produced is urged to be treated to prevent humanity and environment from being threatened. Membrane technology is an appealing alternative for oily wastewater treatment due to its design simplicity, energy efficiency and environmentally benign approach. In this ...

Abstract: Nano pore Mordenite membranes were prepared on the outer surface of ceramic tubular tubes via hydrothermal synthesis and evaluated for dehydration pervaporation of water unsymmetrical dimethylhydrazine UDMH mixtures. Highly water-selective mordenite membranes were prepared and the optimum reaction condition was found to be 24 h crystallization time and 170 °C crystallization temperatu...

removing of ions from different water and waste water is one of the most important of nanofiltration potential for different aims, such as softening of potable water, remove of heavy metal ions and purification of waste water to reuse. in this study nanofiltration was used to remove of the most important ions (na+, k+, ca2+, mg2+, so42-, cl-) in sugar beet press water to reuse of this stream. e...

an innovative method based on the membrane bioreactor (mbr) technology was developed as a potential remedy for the water shortage. mbrs attracted much attention in the field of wastewater treatment and reuse. it is reported from many researchers that membrane bioreactor technology is feasible and an efficient method for the treatment of wastewater. however, mbrs are faced to membrane fouling whic...

a microporous bisphenol a diglycidyl ether (dgeba) epoxified-polyethersulfone (pes) blend membrane (epes membrane) was prepared through dry-wet phase inversion. this study attempts to correlate the changes in membrane physical and chemical properties when the epes membranes were exposed to different durations of dry-phase inversion, towards the separation efficiency of carcinogen chromium (vi)....

Modified cellulose acetate (CA) membranes were prepared by dissolving the polymers in a mixture of acetone (AC) and N, N dimethylacetamide (DMAc) (70:30) solvent and deionized (DI) water was used in the coagulation bath. The introduction of polyethylene glycol (PEG) additive and TiO2 nanoparticles (NPs) into the casting solution has changed the structures of the resulting membranes during the p...

the microfiltration 0.2 µm cellulose acetate (ca) membrane was modified by embedding antibacterial silver nano-particles in the membrane pores. this novel technique was developed to enhance the capability of the microfiltration membrane for removing microorganism including bacteria. the prepared membrane was characterized using scanning electron microscopy (sem), energy-dispersive x-ray spectro...

Chitosan/polyethersulfone (CS/PES) composite membrane was prepared from casting chitosan solution on polyethersulfone substrate membrane. The Substrate membrane was prepared by phase inversion technique using polyethersulfone (PES) and dimethylacetamide (DMAc) as solvent with and without the addition of polyvinylpyrrolidone (PVP) as pore-forming agent. The effects of the composition of the c...

One of the limiting factors in good performance of forward osmosis (FO) membranes is the internal concentration polarization (ICP). To reduce ICP, thin film nanocomposite forward osmosis (TFN-FO) membranes were fabricated by adding different amounts of graphene oxide (GO) nanoplates (0-1 wt. %) to polymer matrix of polysulfone (PSf) substrate. The prepared nanocomposite membranes exhibited both...

a palladium composite membrane was prepared via electroless plating technique using organic-inorganic method during activation process. the ceramic support surface was modified by two tio2-boehmite and one γ-alumina layers to avoid pd penetration in support pores. thin and defect-free pd composite membrane was obtained by creating a relative smoothness on the ceramic support and using pd nanopa...