Boiling heat transfer is a superior heat transfer technology using the latent heat transport with phase-change. However, it has been difficult to employ as a cooling technology for electronics because the unstable transition boiling and film boiling with excessive high temperature are impossible to control. In highly subcooled boiling, the coalescing bubbles formed on the heating surface collap...

jet impingement boiling is investigated with regard to heat transfer and pressure drop performance using a novel laser sintered 3D printed jet impingement manifold design. Water was the working fluid at atmospheric pressure with inlet subcooling of 7 o C. The convective boiling performance of the impinging jet system was investigated for a flat copper target surface for 2700≤Re≤5400. The result...

The onset of nucleate boiling in the flow of water through a microchannel heat sink was investigated. The microchannels considered were 275 lm wide by 636 lm deep. Onset of nucleate boiling was identified with a high-speed imaging system and the heat flux at incipience was measured under various flow conditions. An analytical model was developed to predict the incipient heat flux as well as the...

Water infiltrating down a fracture in unsaturated rock experiences complex fluid-flow and heat-transfer phenomena when entering above-boiling rock temperature regions. Such conditions are expected, for example, after emplacement of heat-generating nuclear waste in underground repositories. A new, efficient semi-analytical method is proposed in this paper that simulates the flow processes of inf...

This study examines both high-flux flow boiling and critical heat flux (CHF) under highly subcooled conditions using FC-72 as working fluid. Experiments were performed in a horizontal flow channel that was heated along its bottom wall. High-speed video imaging and photomicrographic techniques were used to capture interfacial features and reveal the sequence of events leading to CHF. At about 80...

Experiments are conducted with a perfluorinated dielectric fluid, Fluorinert FC-77, to investigate the effects of channel width, depth, and aspect ratio on flow boiling heat transfer and flow patterns in microchannels. Experiments are performed for a fixed mass flux of 630 kg/ms with eleven different silicon test pieces containing parallel microchannels of widths ranging from 100 μm to 5850 μm ...

Flow boiling of HFE 7000 in five parallel microchannels of 222 m hydraulic diameter, each containing a single row of 24 in-line 100 m pin fins, was investigated. High speed photography revealed the dominant flow patterns, namely, the bubbly flow, the multiple flow, and the wavy-annular flow. The interaction of the bubble with the pin fins during nucleate boiling from G 350 kg /m2 s to G 827 kg ...

The use of immiscible liquids for cooling of surfaces with high heat generation density is proposed based on the experimental verification of its superior cooling characteristics in fundamental systems of pool boiling and flow boiling in a tube. For the purpose of practical applications, however, heat transfer characteristics due to flow boiling in narrow rectangular channels with different sma...