As a new type of biological treatment process, membrane aerated biofilm reactors (MABRs), which have received extensive attention and research in recent years, could reduce energy consumption by 70% compared to the traditional activated sludge process. The MABR system uses bubble-free aeration material as carrier, counter-diffusion mechanism oxygen pollutants enables ammonium oxidizing bacteria...

Flip buckets are terminal spillway elements, generating free jets for energy dissipation. Deflectors are an alternative to flip buckets with constructional ease yet of similar hydraulic features. A first experimental study published at the 33 IAHR Congress, Vancouver, investigated deflectorgenerated jets in terms of their air concentration characteristics. For jet impact onto a movable bed, the...

in this paper, modeling and optimization of fischer-tropsch synthesis is considered in a fixed-bed catalytic reactor using an industrial fe-cu-k catalyst. a one dimensional pseudo-homogenous plug flow model without axial dispersion is developed for converting syngas to heavy hydrocarbons. the effects of temperature, pressure, h2 to co ratio in feed stream, and co molar flow on the mass flow rat...

the steps taken in designing a loop reactor for bulk propylene polymerization are discussed. the roles played by several parameters like particle growth factor, catalyst activity and solid fraction on reactor volume at different operating conditions are investigated. at first, based on a fixed production capacity and specific rate of catalyst, reactor volume is determined. next, the length and ...

Microbial fuel cell (MFC) technology provides a low cost alternative to conventional aerated wastewater treatment, however, there has been little comparison between MFC and aeration treatment using real wastewater as the substrate. This study attempts to directly compare the wastewater treatment efficiency and energy consumption and generation among three reactor systems-a traditional aeration ...

In this study, the effectiveness of two conventional UV reactors in series for the online sterilization of cheese whey was compared to that of a single conventional reactor. The single reactor and the two reactor series were tested at eleven flow rates (5, 10, 15, 20, 25, 30, 35, 40, 50, 60 and 70 mL min ) and five flow rates, (35, 40, 50, 60, 70 mL min ), respectively. 100% destruction efficie...

Aerated treatment wetlands have become an increasingly recognized technology for treating wastewaters from domestic and various industrial origins. To date, treatment wetland aeration is provided by air pumps which require access to the energy grid. The requirement for electricity increases the ecological footprint of an aerated wetland and limits the application of this technology to areas wit...

Recently, particular attention has been paid to the stepped spillways due to the increasing effect of energy dissipation and the reduction of cavitations risks with the development of Roller Compacted Concrete (RCC) technique. Flow regimes on the spillways divide into three groups, namely skimming, jet and transition flow. Compared to the numerical methods, the majority of performed studies in ...

A steady-state cross-flow reactor for ethylene epoxidation was simulated using industrial data (low oxygen/ethylene feed ratio) and pilot plant data (high oxygen/ethylene feed ratio). A comparison between the conventional fixed-bed reactor and the cross-flow reactor with two types of feeding modes was performed. The present study showed the possibility of enhancing the reactor yield by distribu...