To ensure bearing reliability, it is traditional for compressor manufacturers to specify a minimum oil sump temperature difference above the saturated discharge temperature in a high-side compressor and suction temperature in a low-side compressor. This minimum oil sump temperature specification is, in essence, a surrogate measure of the minimum viscosity the compressor manufacturer reqtrires t...

This data contains additional data related to the article "Influence of Substrate Temperature on the Film Morphology and Photovoltaic Performance of Non-fullerene Organic Solar Cells" (Jicheng Zhang et al., In press) [1]. Data include measurement and characterization instruments and condition, detail condition to fabricate norfullerene solar cell devices, hole-only and electron-only devices. De...

Occurrence of Hysteresis like behavior of resistance of Sb 2 Te 3 film in heating-cooling cycle. Abstract Experimental observations of a peculiar behavior observed on heating and cooling Sb 2 Te 3 films at different heating and cooling rate are detailed. The film regained its original resistance, forming a closed loop, on the completion of the heating-cooling cycle which was reproducible for id...

The formation of high-density silver nanoparticles and a novel method to precisely control the spacing between nanoparticles by temperature are demonstrated for a tunable surface enhanced Raman scattering substrates. The high-density nanoparticle thin film is accomplished by self-assembling through the Langmuir-Blodgett (LB) technique on a water surface and transferring the particle monolayer t...

Current methodologies used for the inference of thin film stress through curvature measurements are strictly restricted to stress and curvature states which are assumed to remain uniform over the entire film/substrate system. By considering a circular thin film/substrate system subject to non-uniform, but axisymmetric temperature distributions, we derive relations between the film stresses and ...

Amorphous hydrogenated carbon films were prepared by hot filament Plasma Enhanced Chemical Vapor Deposition using acetylene as precursor. NiP-coated Al substrate was sputtered with thin layer of ruthenium film prior to carbon deposition for its impact on carbon film growth. Film thickness measured and fitted using X-ray Reflectometry showed carbon film growth is an exothermic reaction with appa...

Current methodologies used for the inference of thin film stress through curvature measurements are strictly restricted to stress and curvature states that are assumed to remain uniform over the entire film/substrate system. By considering a circular thin film/ substrate system subject to nonuniform and nonaxisymmetric temperature distributions, we derive relations between the film stresses and...

Atomic-layer-deposition (ALD) of In2O3 nano-films has been investigated using cyclopentadienyl indium (InCp) and hydrogen peroxide (H2O2) as precursors. The In2O3 films can be deposited preferentially at relatively low temperatures of 160-200 °C, exhibiting a stable growth rate of 1.4-1.5 Å/cycle. The surface roughness of the deposited film increases gradually with deposition temperature, which...

An analytical model has been developed for the study of turbulent film condensation from downward flowing vapors onto a horizontal elliptical tube with variable wall temperature. The interfacial shear at the vapor condensate film is evaluated with the help of Colburn analogy. The condensate film flow and local/or mean heat transfer characteristics from a horizontal elliptical tube with nonunifo...