present study deals with the adsorption of glycolic acid (ga) from aqueous solutions by using bagasse fly ash (bfa). bfa is a solid waste generated from bagasse fired boilers and can be used as an adsorbent. batch adsorption studies were carried out to evaluate the effect of various parameters like adsorbent dose, contact time, initial concentration and temperature on the removal of ga from aq...

the effective removal of dyes from aqueous wastewaters is among the most important issues formany industrialized countries. removal of congo red (cr) dye from aqueous solutions was studiedusing nickel oxide nanoparticles. the operating variables studied were initial ph of solution,adsorbents dosage, temperature and contact time. the morphological information of nickel oxidenanoparticles were ch...

varieties of st. john’s wort (hypericum perforatum l.) native to iran possess the largest percentage of hypercin in their leaves and flowers. isotherm curves show the relationship between the relative humidity and moisture content of the plant at a constant temperature. it is essential to understand the isotherms curves for successful storage and drying of the plant. this study used adsorption ...

The occurrence of contaminants in wastewaters, and their behavior during wastewater treatment and production of drinking water are key issues to re-use water resources. The present research aims to remove caffeine from aqueous solutions via adsorption technique, using Multi-Wall Carbon Nanotubes (MWCNTs) as an adsorbent under different experimental conditions. The processing variables such as p...

Removal of cesium from synthetic aqueous solution through adsorption on bentonite, under batch equilibrium experimental condition at different values of pH and four temperatures (303, 313, 323, 333 K) was investigated. For this propose the suitability of the Freundlich adsorption model for equilibrium data were investigated. The parameters in the adopted adsorption isotherm models were determin...

Sawdust is obtained from naturally and easily available which is biodegradable. The bio sorption capacity of the sawdust for hexavalent chromium was studied at different solution pH values (1.5-6), initial metal concentration (50450 mg/L), adsorbent dose (1-7 g/L). The maximum adsorption of Cr (VI) is obtained at pH 1.5, initial concentration 50 ppm and adsorbent dose 5 g/l. The adsorption of c...

in this work, removal of c. i. acid red 14 was investigated by pumice stone as a low cost adsorbent. various parameters such as initial dye solution, contact time and ph were studied. removal of dye were increased by increasing of contact time and initial dye solution and deceased by increasing of ph. three isotherm models were studied. linear and non-linear regression analyses were used for de...

a good understanding of adsorption equilibrium and thermodynamics is required to design and operate an adsorption process. this study was conducted to assess the adsorption percentage of pb2+ ions as a function of contact time, solution ph and temperatures, and adsorbent dosage through a series of batch experiments. the methods including zeta potentials, specific surface area measurements and t...

Five different activated carbons (ACs) have been prepared from dried date pits using air and phosphoric acid as activating agents. The used phosphoric acid:date pit ratio dictated the characteristics of the prepared ACs; the equivalent BET-nitrogen surface area varied from 794 m²/g for a ratio of 5:1, to 1707 m²/g for a ratio of 2:1, whereas the micropore volume changed in value from 0.24 cm³/g...

Activated carbon prepared from Cucumis Melo Peel was used as adsorbent for the removal of chromium ion from aqueous solution. Adsorption experiments were performed by varying initial metal ion concentration, temperature, and pH. Freundlich and Langmuir isotherms were used to analyze the equilibrium data obtained at different adsorption conditions. Adsorption results obtained, shows that the Cr ...