Cu is known as one of the harmful tramp elements in recycled Fe. In the present work, the effects of Cu on Fe grain boundary (GB) embrittlement have been investigated by first-principles tensile tests. Because the Fe-Cu bonds are rather isotropic and the effects due to their difference in atomic size are negligibly small, the GB atomic structure prior to straining is little changed by Cu segreg...

The purpose of this collaborative research project involving the University of Nevada Las Vegas (UNLV), Los Alamos National Laboratory (LANL) and Idaho State University (ISU) is to evaluate the effect of silicon (Si) content on the corrosion behavior and radiation-induced embrittlement of martensitic stainless steels having chemical compositions similar to that of the modified 9Cr-1Mo

Polyethylene nanocomposites with silica, alumino-silicate and thermally reduced graphene were generated by adding pro-oxidant additive. Additive resulted in early degradation of pure polymer, however, the degradation was delayed in the presence of fillers. Graphene resulted in maximum extent of enhancement of peak degradation temperature (13-14 °C depending on the additive content) followed by ...

Recent investigations have revealed that Pb-free solder joints may be fragile, prone to premature interfacial failure particularly under shock loading, as initially formed or tend to become so under moderate thermal aging. Depending on the solder pad surface finish, different mechanisms are clearly involved, but none of the commonly used surface finishes appear to be consistently immune to embr...

Lithiation of individual multiwalled carbon nanotubes (MWCNTs) was conducted in situ inside a transmission electron microscope. Upon lithiation, the intertube spacing increased from 3.4 to 3.6 Å, corresponding to about 5.9% radial and circumferential expansions and ∼50 GPa tensile hoop stress on the outermost tube wall. The straight tube walls became distorted after lithiation. In situ compress...

Hydrogen embrittlement of SK85 high-strength steel sheets was evaluated through a three-point bending test. The effects electroless Ni–P plating and Ni electroplating on hydrogen were examined with respect to the permeability plated films. On morrow plating, indicates high degree embrittlement, irrespective phosphorus content in film. However, is further suppressed than that which can be attrib...

Electrodeposition is the method of plating metal into another by hydrolysis generally to protect against corrosion metal. In Zinc Electroplating, deposited on steel, where acts as a sacrificial element that enhances Steel’s life. The zinc electroplating methods are mostly affected process parameters such current, temperature, voltage, etc. Hydrogen absorbed in plated layer and later it causes c...

Segregation-induced changes in interfacial cohesion often control the mechanical properties of metals. The change in the work of separation of an interface upon segregation of a solute to the interface, termed the embrittling potency, is an atomic-level quantity used to predict and understand embrittlement phenomena. We present a compilation of calculations of embrittling potencies, along with ...