Si-incorporated diamond-like carbon (Si-DLC) coatings ranging from 0 to 2 at % Si were deposited on Ti-alloy substrate by means of radio frequency plasma-assisted chemical vapor deposition (r.f. PACVD) technique, using a mixture of benzene (C(6)H(6)) and silane (SiH(4)) as the reaction gas. The synergy in wear and corrosion of Si-DLC coatings was investigated by tribological and electrochemical...

A new anti-corrosion compound, Melamine Formaldehyde (MF), was formulated by the addition of proper amount of formaldehyde to melamine under specific conditions. This compound was mixed with a novel nano powder, which was extracted from corn cob ash containing SiO2 particles, in order to improve its corrosion inhibition efficiency. This inhibitor provides a high level of protection f...

INTRODUCTION Recently, the popularity of Metal-on-Metal (MoM) hip bearings have diminished due to the concerns with generated wear debris and metal ion release that cause a negative response in the surrounding tissues. MoM bearings are typically manufactured from two types of metal alloys, lowcarbon (LC) and high-carbon (HC) CoCrMo. However, little is known about the in-vivo behavior of the two...

Ti-6Al-4V titanium alloy has great application in medicine and military industries due to its capabilities, namely high strength to weight ratio and corrosion resistance. In the current research, the effect of aging treatment on microstructure and wear behavior of Ti-6Al-4V titanium alloy was investigated. Pin on disk wear test was applied to assess the wear behavior. Specimens were first solut...

A new anti-corrosion compound, Melamine Formaldehyde (MF), was formulated by the addition of proper amount of formaldehyde to melamine under specific conditions. This compound was mixed with a novel nano powder, which was extracted from corn cob ash containing SiO2 particles, in order to improve its corrosion inhibition efficiency. This inhibitor provides a high level of protection f...

as the turbine industries need to manufacture turbine blades made of martensitic stainless steel aisi 420 with high toughness and wear resistance, local laser hardening has become more and more important. in this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...

Ball mills are common grinding equipment in mineral processing industries. Ball wear results from three mechanisms namely impact, abrasion and corrosion. Of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. Therefore, the aims of this research were to investigate the grinding chemistry influence (slurry pH, solid percentage, water chemistry an...

The present study outlines the use of Taguchi parameter design to minimize the wear performance of electroless Ni-B coating by optimizing the tribological testing parameters. The tests are carried out in a multitribotester and the three parameters viz. load (L), speed (S) and time (T) are considered with three levels each. An L27 array is used to accommodate the three factors as well as their i...