The aim of this study was to determine a suitable amount of grinding of a flexural test specimen for clinical evaluation of dental ceramics. Three dental ceramics (Crys-Cera, OCC and IPS Empress Cosmo) were selected. Five types of bar-shaped patterns were prepared for a three-point bending test, and four types of disk-shaped patterns for a biaxial flexural test. Ceramic specimens were fabricate...

This review is intended to provide the ceramic engineer with information about the history and current use of ceramics in dentistry, contemporary research topics, and potential research agenda. Background material includes intra-oral design considerations, descriptions of ceramic dental components, and the origin, composition, and microstructure of current dental ceramics. Attention is paid to ...

Based on the development of adhesive dentistry, minimally invasive restorations in ceramics are used as alternativesto restore a tooth. Dental largely applied dentistry field mainly due to their esthetic andmechanical strength. One ceramic properties be well known before its use is wear resistance thatshould compatible with antagonist behavior avoid unwanted performance. Therefore, severalmetho...

statement of problem: the connector area is the weakest zone of an all-ceramic fixed partial denture (fpd), where most catastrophic failures of the prostheses tend to occur. purpose: the aim of the present study was to assess the effect of the convergence angle of abutments on the fracture resistance of three-unit fixed partial dentures made of ips-empress2. materials and methods: forty extract...

A valuable characteristic of the "IPS Empress" used for producing all ceramic dental restorations is that it is a prefired ceramic ingot. The ingot is heated, softened and press-injected into the cavity, and ceramic restorations are fabricated by the lost wax casting method. The leucite crystal present in the ingot are scattered and distributed into the glassy phase in a more homogeneous manner...

PURPOSE The color of the ceramic restorations is affected by various factors such as brand, thickness of the layered the ceramic, condensation techniques, smoothness of surface, number of firings, firing temperature and thickness of dentin. The aim of this study was to evaluate the color change and surface roughness in dental porcelain with different thicknesses during repeated firings. MATER...

The aim of this article is to describe the possibility of improving dental esthetics with low-thickness glass ceramics without major tooth preparation for patients with small to moderate anterior dental wear and little discoloration. For this purpose, a carefully defined treatment planning and a good communication between the clinician and the dental technician helped to maximize enamel preserv...

Our knowledge on the bonding mechanisms between the metal and ceramic parts of dental systems is very limited. This work tested the hypothesis that the details of the interface processes can be described in the framework of a chemical diffusion model. The development of interfacial phases was investigated by cross-sectional analytical transmission electron microscopy between a NiCr (Wiron 99) a...