In this study, the grindability of cast magnetic alloys (Fe-Pt-Nb magnetic alloy and magnetic stainless steel) was evaluated and compared with that of conventional dental casting alloys (Ag-Pd-Au alloy, Type 4 gold alloy, and cobalt-chromium alloy). Grindability was evaluated in terms of grinding rate (i.e., volume of metal removed per minute) and grinding ratio (i.e., volume ratio of metal rem...

Dental alloys as CoCrMo, SS 316L stainless steel and NiTi were electrochemically investigated in artificial Fusayama saliva, unmodified and modified with two different concentrations of natrium fluoride. Electrochemical tests include measurements of open circuit, measurements of linear polarization, potentiodinamic polarization curves and electrochemical impedance spectra. The best electrochemi...

The recasting of previously casted alloy is a routine procedure used in dental laboratories in order to reduce the cost of permanent partial dentures. The prosthetic “scrap” encompasses the residuals generated in frame dentures casting process e.g. originating from the runners, from casting cones and improperly completed melts e.g. withmisruns, shrinkage porosities and cracks and is frequently ...

Metallic materials have widespread use in dentistry for clinical treatment and restoration of teeth. Major areas of usage are: (1) restorative dentistry and prosthodontics (dental amalgam and gold alloy restorations for single teeth, metallic restorations for multiple teeth, including metal-ceramic restorations, removable partial denture frameworks, and dental implants), (2) orthodontics (wires...

PURPOSE The aim of this study was to evaluate the effect of metal primers on the bonding of dental alloys and veneer resin. Polyvinylpyrrolidone solution's tarnish effect on bonding strength was also investigated. MATERIALS AND METHODS Disk-shape metal specimens (diameter 8 mm, thickness 1.5 mm) were made from 3 kinds of alloy (Co-Cr, Ti and Au-Ag-Pd alloy) and divided into 4 groups per each ...

BACKGROUND Sandblasting particles which remain on the surfaces of dental restorations are removed prior to cementation. It is probable that adhesive strength between luting material and sandblasting particle remnants might exceed that with restorative material. If that being the case, blasting particles adhere to sandblasted material surface could be instrumental to increasing adhesive strength...

PURPOSE The aim of the present study was to record the metal-ceramic bond strength of a feldspathic dental porcelain and a Co-Cr alloy, using the Direct Metal Laser Sintering technique (DMLS) for the fabrication of metal substrates. MATERIALS AND METHODS Ten metal substrates were fabricated with powder of a dental Co-Cr alloy using DMLS technique (test group) in dimensions according to ISO 96...

introduction: disinfection and subsequent obturation of the root canal space require adequate mechanical enlargement of the canals. the purpose of this in vitro study was to compare the shaping ability of mtwo, race and medin rotary instruments during the preparation of curved root canals. materials and methods: sixty mesiobuccal root canals of mandibular molars with severe curvatures between 2...

The corrosion of dental biomaterials is a pertinent clinical issue. In spite of the recent innovative metallurgical and technological advances and remarkable progress in the design and development of surgical and dental materials, failures do occur. The present article describes the problem of corrosion in titanium dental implants. The clinical significance of the dental implant corrosion is hi...

Titanium is an ideal material for use in prosthodontics because of its biocompatibility, corrosion resistance, and mechanical strength combined with its lightweight. Recently the use of titanium and titanium alloys for fixed restorations has increased substantially, mainly due to the improvement of techniques for the casting titanium and its alloys. This article reviewed the studies on titanium...