X ray microtomography experiments were performed in order to evaluate the densification of silica sand submitted to horizontal sinusoidal vibrations carried out at constant frequency (50 Hz) with controlled acceleration and deceleration Γ. Packing homogeneity was characterized using relative density distribution through 3D images of the relaxed samples. Information obtained from the images allo...

Commercial zirconium carbide (ZrC) powder is consolidated by Spark Plasma Sintering (SPS). Processing temperatures range from 1650 to 2100 °C. Specimens with various density levels are obtained when performing single-die SPS at different temperatures. Besides the single-die tooling setup, a double-die tooling setup is employed to largely increase the actual applied pressure to achieve higher de...

Microwave sintering (MWS) of commercially available 15-nm-size nanocrystalline TiN powder was studied. Densification kinetics and grain growth mechanisms of nano-TiN were evaluated using non-isothermal heating up to 1500 °C with variable heating rates. A true nanocrystalline ceramic with ~80-nm-size grains and 94.5 % theoretical density was obtained via MWS consolidation at 1400 °C. At higher t...

This paper documents the successful application of explosive compaction technology for the densification of granular soils using case history data from a number of sites. The data include densification projects in urban areas, for dam foundations and for offshore structures. The paper provides general background information on the theory of explosive compaction of soils, design considerations, ...

Network densification is attracting increasing attention recently due to its ability to improve network capacity by spatial reuse and relieve congestion by offloading. However, excessive densification and aggressive offloading can also cause the degradation of network performance due to problems of interference and load. In this paper, with consideration of load issues, we study the optimal bas...

A. Eksi, Faculty of Engineering and Architecture, Çukurova University, Adana, Turkey, M. K. Kulekci, Faculty of Technical Education, Mersin University, Tarsus, Turkey In this study hardness and densification behaviour of copper and bronze powders under wet bag cold isostatic and uniaxial die pressing processes are examined. In uniaxial pressing the specimens were compacted up to a pressure of 8...

The densification response of aluminium powder reinforced with nanometric SiC particles (50 nm) during uniaxial compaction was studied. To determine the effect of SiC nanoparticles on the compressibility of the matrix, monolithic Al powder was also examined. The effect of SiC nanoparticles on the densification mechanisms, i.e. particle rearrangement and plastic deformation, was analysed using m...

An observed minimum in the critical crack initiation load at Poisson’s ratio (ν) of 0.21–0.22 in Na2O–TiO2–SiO2 glasses was investigated. Vickers indentation was used to examine hardness and average cracking length, fracture toughness was measured through the single-edge pre-cracked beam method, and volumes of densification and shear flow around indents were measured using atomic force microsco...

Yb2O3 is an efficient sintering additive for enhancing not only thermal conductivity but also the high-temperature mechanical properties of Si3N4 ceramics. Here we report the fabrication of dense Si3N4 ceramics with high thermal conductivity by the gas pressure sintering of α-Si3N4 powder compacts, using only Yb2O3 as an additive, at 1900 °C under a nitrogen pressure of 1 MPa. The effects of Yb...

In recent years, the rolling densification process has become increasingly widely used to strengthen powder metallurgy parts. The original composition of the rolled powder metallurgy blank has a significant effect on the rolling densification technology. The present work investigated the effects of different carbon contents (0 wt. %, 0.2 wt. %, 0.45 wt. %, and 0.8 wt. %) on the rolling densific...