In this paper, a new solar-heated generation system with capacity of 10kW is designed. The system is based on solar-heated Rankine cycle. The CPC solar energy collector array is used as the main heat source, and the gas boiler as the assistant heat source. The heat storage facility provides heat for put-off 24 hours generating without sun’s radiation. The paper is focused on the analysis of fou...

in this research a flat plate solar air collector was investigated under direct solar radiation consisted of a slatted glass cover, perforated absorber aluminum sheets (porosity 0.0177, 0.0314 and absorber thickness of 2.5 mm). the effect of porosity on absorber efficiency of collector was evaluated. six levels of air mass flow rates (0.0056 to 0.0385 kg m-2 s-1) were adopted.average solar ener...

An evacuated tubular solar collector was fabricated from acrylics for improved resistance to shattering. A plasmatron was employed to apply a thin gas-barrier coating to the surfaces of the plastic tube to prevent/alleviate gas infiltration. Experiments were conducted to investigate the effect of vacuum level on the performance of the non-glass vacuum-tube solar collector. Inserted in the evacu...

sustainable development would be a key solution for climate change and renewable energy plays an important role in this policy. recently, according to increase of co2 emission and other relevant impacts, solar energy has been gaining more attentions from policy makers. thus, compound parabolic concentrators collectors are considered as one of the promising applications from solar thermal advant...

Solar air heater is a type of heat exchanger which transforms solar radiation into heat energy. The thermal performance of conventional solar air heater has been found to be poor because of the low convective heat transfer coefficient from the absorber plate to the air. It is attributed to the formation of a very thin boundary layer at the absorber plate surface commonly known as viscous sub-la...

In this paper we present a prototype for a new type of solar thermal collector designed for architectural integration. In this proposal, the conventional geometry of a flat solar thermal collector is changed to a curved geometry, to improve its visual impact when mounted on a building facade or roof. The mathematical equations for the beam and diffuse solar radiation received by a collector wit...

An evacuated tube solar collector using therminol D-12 as heat transfer fluid coupled with parabolic trough is studied in this paper. An experimental set-up was constructed to study the performance of evacuated tube collector with therminol D-12 as heat transfer fluid. The parabolic trough is coupled with evacuated tube collector for better performance. In the traditional solar collectors water...

Solar Energy Applications Laboratory , Colorado State University . Fort Collins , CO 80523 Design of a vapor transport solar water heater using R-123 is optimized to maximize thermal performance and minimize life cycle cost. Optimal systems for one and twostory homes are identified in a parametric study of collector area, condenser heat transfer area, water storage tank volume and circulating r...