deep drawing of cylindrical shapes with high limiting drawing ratio (ldr) values is relatively difficult. annealing is a further operation, which in turn adds costs and consumes significantly time to the forming process. in the present work, cylindrical cups from brass sheet were made with only limited anneal during few steps, but having ldr of 9 that is about 2 times higher than previous works...

A general review of the extended finite element method and its application to the simulation of first-order phase transitions is provided. Detailed numerical investigations are then performed by focusing on the one-dimensional case and studying: (i) spatial and temporal discretisations, (ii) different numerical techniques for the interface-condition enforcement, and (iii) different treatments f...

In this article, the multi-objective optimization of cylindrical aluminum tubes under axial impact load is presented.The absorbed energy and the specific absorbed energy (SEA) are considered as objective functions while the maximum crush load should not exceed allowable limit. The geometric dimensions of tubes including diameter, length and thickness are chosen as design variables. The Non-domi...

dynamic behavior of ground supported cylindrical storage tanks (cst) is of crucial importance because of its applications in industrial complexes. seismic behavior of tanks is greatly affected by the height to diameter ratio, fluid height and fluid type. five csts with different height to diameter ratios, three csts with the same height and diameters but various fluid heights and one cst with t...

In recent years application of CFRP sheets in the strengthening of the concrete circular column has increased numerously. Knowing the exact behavior of concrete cylindrical columns confined with CFRP is of the first order of importance. ISIS Code of Canada has given relations for strength increase of circular columns confined with CFRP sheets, these relations are defined for a specified range o...

a new three-dimensional unit cell model has been developed for modeling three constituent phases including inclusion, interphase and matrix. the total elastic modulus of nano-composite is evaluated.  numerical results are in good agreement with the previous proposed theoretical modeling. higher matrix and inclusion elastic modulus both can dramatically influence the total elastic modulus.