Rigidization of inflatable space structures via internal resistive heating requires carbon fiber reinforced material to consolidate and cure on-command. In terms of the spacecraft’s life, the rigidization process transforms a structurally weak “balloon” into a robust, stable design. Internal resistive heating provides an active approach for inducing permanent shapeholding and structural stiffen...

AIM The study compared pulp temperature rise during polymerization of resin-based composites (RBCs) using halogen and LED light-curing units (LCUs). METHODS AND MATERIALS A total of 32 teeth extracted from patients aged 11-18 years were used in the study. Thermocouples placed on the roof of the pulp chamber using a novel 'split-tooth' method. In Group 1 a halogen LCU with a light intensity of...

Plasma and halogen lamp units were used to photo-cure a composite resin for porcelain bonding. Mean shear bond strengths to dentin after light curing through porcelain of 1 and 2 mm thickness ranged from 20 to 27 MPa before and after thermocycling, indicating no significant effects due to porcelain thickness, curing method, or thermocycling, except for plasma curing for 3 s through porcelain of...

This study investigated the feasibility of using an electron beam (EB) process to cure chemically impregnated wood products. Maple wood planks were impregnated with the low-viscosity resins 1,6 hexanediol dimethacrylate (HDDA) and trimethylolpropane trimethacrylate (TMPTA). The addition of nanoparticles into the formulation was also studied. The impregnated wood was then cured by EB irradiation...

We demonstrate a simple one-step method for synthesizing noble metal nanoparticle embedded free standing polydimethylsiloxane (PDMS) composite films. The process involves preparing a homogenous mixture of metal salt (silver, gold and platinum), silicone elastomer and the curing agent (hardener) followed by curing. During the curing process, the hardener crosslinks the elastomer and simultaneous...

AIM The aim of this study is to evaluate the dimensional accuracy of heat polymerized acrylic resin denture base clamped by the conventional method and by new-press technique and cured by long curing cycle. MATERIALS AND METHODS In this study, a total of 60 standardized maxillary record bases were fabricated with seven reference points as follows: Point A: Incisive papilla, Point B and C: Can...

A design sensitivity method is used to find optimal autoclave temperature and pressure histories for curing of thermoset-matrix composite laminates. The method uses a finite element simulation of the heat transfer, curing reaction, and consolidation in the laminate. Analytical sensitivities, based on the direct differentiation method, are used within the finite element simulation to find the de...