agglomeration followed by pelleting is an efficient method to decrease transport costs and increase economic efficiency of composting municipal waste. the moisture content of compost is the most important parameter of the pellet making process for any type of manufacturing device. the experiments in this study were done at moisture contents of 35%, 45% and 50% at extruder shaft rotational speed...

In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...

In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...

in this paper, hardness and tensile properties of welded zone of aluminum 1100 alloys by friction stir welding process was investigated and the effects of rotational and traverse speeds of tool on these parameters was studied. also the fracture cross-section of welded samples was investigated. according the results of this paper, the hardness of weld material is higher than base material and is...

In this paper experimentally, the friction-stir welding of the polypropylene sheets with 40% glass fiber has been investigated. Comparison to other welding methods, the strength of the joint is the most important feature in this process. Many parameters such as tool geometry, rotational speed, linear velocity, and tilt angle are very important as input parameters in this type of welding. Theref...

hot rolling of a large ring of titanium alloy (lrt) is a highly nonlinear incremental forming process with coupled mechanical and thermal behaviors (mtbs) which significantly affect microstructure and properties of the ring. the feed rate of idle roll and the rotational speed of driver roll have major effects on ovality of the ring. in this paper, the effects of these parameters on the ovality ...

in this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the sic abrasive slurry and al2o3, use of diamond paste as abrasive tool) in magnetic abrasive finishing process using designing of experiments on the external surface of cylindrical work pieces of stainless steel aisi 440c to get minimum surface roughness has been...

this study focused on the optimization of al—mg to cuzn34 friction stir lap welding (fslw) process for optimal combination of rotational and traverse speeds in order to yield favorable fracture load using grey relational analysis (gra). first, the degree of freedom was calculated for the system. then, the experiments based on the target values and number of considered levels, corresponding orth...

Drum corps color guard experts spend years developing skills in spinning rifles, sabers, and flags. Their expertise provides a unique window into factors that govern sensitivity to the speed of rotational and radial motion. Prior neurophysiological research demonstrates that rotational and radial motion register in the Medial Superior Temporal (MST) region of the primate visual system. To the e...