the creep behavior of basalt fiber reinforced epoxy (bfre) and glass fiber reinforced epoxy (gfre) composites was studied through tensile testing at high temperature. to study the effect of reinforcing epoxy, the micro glass powder (mgp) was added at various volume percentage into the epoxy resin in bfre composites. the initial strain for all the specimens were evaluated and compared with each ...

The viscoplastic behavior of a carbon-fiber/polymer matrix composite was investigated through two different modeling efforts. The first model is phenomenological in nature and utilizes the tensile and stress relaxation experiments to predict the creep strain. The phenomenological model was constructed based on the overstress viscoplastic model. In the second model, the composite viscoplastic be...

Diffusion dominates the creep deformation at low stress range for high chromium steel P91. Brittle creep fracture is caused by cavity nucleation, growth and coalescence of cavities and large precipitates (Laves phase and M23C6) at grain boundary under low stress range. At low stress range, a linear relation between strain at failure and different stresses has been described. Moreover, the minim...

Indentation creep tests were performed on an Al-5.3mol% Mg solid-solution alloy to examine whether mechanical properties can be extracted accurately from a testpiece, as small as a rice grain. A conical diamond indenter was pressed into a test surface with a constant load F at temperatures ranging from 0.60 to 0.65 Tm (Tm: the absolute liquidus temperature). When the representative flow stress ...

Gamma titanium aluminides (γ-TiAl) display significantly improved high temperature mechanical properties over conventional titanium alloys. Due to their low densities, these alloys are increasingly becoming strong candidates to replace nickel-base superalloys in future gas turbine aeroengine components. To determine the safe operating life of such components, a good understanding of their creep...

Creep behavior of thick-walled functionally graded cylinder consisting of AlSiC and subjected to internal pressure and high temperature has been analyzed. The functional relationship between strain rate with stress can be described by the well known threshold stress based creep law with a stress exponent of five. The effect of imposing non-linear particle gradient on the distribution of creep s...

Creep deformation behaviour in single phase $\gamma$-TiAl alloy has been an extensively studied topic since the late 1970s. A lot of literatures have reported creep alloys, manufactured using different processing techniques. The present discussion revisits original work on understanding tensile wrought single-phase by Hayes et al and is aimed to develop steady state creep, through strain vs rat...

The tensile creep behavior is extremely important in crack prediction and stress analysis of concrete. The main objective is investigating the effects of the silica fume on the tensile basic creep of early-aged concrete. The effect of silica fume on tensile creep was studied using lever-type tensile creep tester. Silica fume amount by weight of total cementing material was 0%, 5%, 10% and 15%. ...

The compressive creep and recovery of foam earplugs was studied at various applied stresses leading to different fi nal creep strains. Deformation was determined from digital videos of the earplugs via image processing software. Creep could not be modeled by a single exponential in time; creep approximated a power law in time. Nonlinear viscoelasticity was observed: creep compliance depends on ...