As one of the main products produced by oral microorganisms, the role of lactic acid in the corrosion of titanium is very important. In this study, the corrosion behavior of titanium in artificial saliva with and without lactic acid were investigated by open-circuit potentials (OCPs), polarization curves and electrochemical impedance spectroscopy (EIS). OCP firstly increased with the amount of ...

Organic corrosion inhibitor is one of lower cost technologies that limit the deterioration of concrete structures. The influence of a newly prepared organic corrosion inhibitor on the corrosion behavior of carbon steel in simulated concrete pore solution was investigated by polarization curves, electrochemical impedance spectroscopy, and so on. The effect of organic corrosion inhibitors on conc...

In this study, an attempt was made to minimize the corrosion rate and maximize pitting potential of dissimilar metal welded joints of A387-Gr91/AISI316 steels. Process parameters of the pulsed current gas tungsten arc welding (PCGTAW) including of peak current (P), background current (B), pulse frequency (F), and on time percentage (O) were chosen as the influencing factors on corrosion behavio...

The in ̄uence of chloride ion concentration and pH on the corrosion and electrochemical behaviour of die-cast and ingot-cast AZ91D alloy have been studied with a focus on the stability of microconstituents in these environments. The experimental techniques used include immersion studies, potentiodynamic polarization, X-ray di€raction and optical and scanning electron microscopy. The corrosion ra...

The heterogeneous structure of Al alloys renders them susceptible to localized corrosion due to the different electrochemical properties existing in the Al-rich solid solution matrix and secondary phase particles. The galvanic interactions between these two phases can result in pit formation either through dissolution of the particles or corrosion of the matrix adjacent to the particles. This d...

Unusually rapid closure of stressed fractures, observed in the initial stages of loading and at low temperatures, is examined using models for subcritical crack growth and pressure solution. The model for stress corrosion examines tensile stress concentrations induced at the Hertzian contact of propping fracture asperities, and mediates fracture growth according to a kinetic rate law. Conversel...

Nitrogen doped tetrahedral amorphous carbon (ta-C:N) thin films were grown on p-Si(1 1 1) substrates using filtered cathodic vacuum arc (FCVA) deposition by varying nitrogen flow rate. The effect of nitrogen flow rate on the corrosion performance of the films was investigated through potentiodynamic polarization and immersion tests in 0.6 M NaCl solutions. The polarization results showed that t...

A method for the detection of in situ corrosion monitoring due to atmospheric gasses has been incorporated to measure not only the amount of corrosion on a copper surface but also the rate of corrosion and a study on the bonding of the adsorbent at the gas solid interface. The Quartz Crystal Microbalance (QCM) has recently been used for this corrosion monitoring. Results indicate a difference i...

In order to prevent corrosion, aluminum nanoparticles were coated with a polyurethane polymer. The coverage of the polyurethane polymer was controlled from 0 to 100%, which changed the corrosion rate of the nanoparticles quantitatively. The surface of the polymer coating was investigated by Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM), and the corrosion resistance of...

In Sweden, high level radioactive waste will be disposed of in a canister with a copper outer and a cast iron or carbon steel inner. If the iron insert comes into contact with anoxic geological water, anaerobic corrosion leading to the generation of hydrogen will occur. This paper presents a study of the anaerobic corrosion of carbon steel and cast iron in artificial Swedish granitic groundwate...