Interconnect parasitics are dominating circuit performance, signal integrity and reliability in IC design. Copper/low-k process effects are becoming increasingly important to accurately model interconnect parasitics. Even if the interconnect process profile is accurately represented, approximations in parasitic extraction could cause large errors. Typically, researchers and designers have been ...

Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...

In this study, cup-shaped copper sheets were developed to improve heat dispassion for high-power light emitting diodes (LEDs) array module (3 × 3, 4 × 4, and 5 × 5) using an electroplating technique. The cup-shaped copper sheets were directly contacted with sapphire to enhance the heat dissipation of the chip itself. The lateral emitting light extraction and heat dissipation of high-power LEDs ...

A simple and sensitive extraction-fluorimetric method for the determination of copper is reported. The 1,7-diaza-15-crown-5-copper-rose Bengal (DA15C5-Cu-RB) ternary complex is quantitatively extracted into chloroform, diluted with ammoniacal acetone and its fluorescence intensity is measured at 570 nm with excitation at 540 nm. A linear calibration graph was obtained over the copper concen...

Processing of anodic slimes from an Egyptian copper electrorefining plant, exhibiting high contents of copper, lead, tin and silver has been presented. The proposed hydrometallurgical process consists of two leaching stages for extraction of copper with H2SO4 – O2 and silver with thiourea – Fe. Pyrometallurgical treatment of the leaching solid residue for production of Pb-Sn soldering alloy was...

This work aims to study the recovery of copper from ammoniacal aqueous solutions using hydrophobic propylene membrane contactors. The hydroxyoxime LIX 84-I and the β-diketone LIX 54 (both from Cognis) were used as extractants. The results obtained showed that practically all the copper content was removed from the ammoniacal feed solutions. The recovery of copper reached nearly 100% in several ...