This paper investigated the effects of combining fibers with self-consolidating concrete (SCC). 12 series of test specimens were prepared using three kinds of fibers including steel, polyphenylene sulfide (PPS) and glass fibers with four different volumes fractions and one specimen without fibers as a reference sample. All plans were subjected to fresh concrete tests. For mechanical behavior of...

This paper investigated the effects of seawater curing of concrete made by Micro-Nano Air Bubbles (MNAB) on compressive, flexural and tensile strengths of the concrete. This product will be applicable for rehabilitation or repair of coastal RC structures. In this research, the effect of different combinations of concrete ingredients including 0-100, 25-75, 50-50, 75-25, and 100-0 percent ...

In this work, the waste stone sludge obtained from the granite and marble stone processing factories was used for the manufacture of artificial stones using vibratory compaction in a vacuum environment. The results obtained showed that water absorption and density increased, and the flexure, compressive, and tensile strengths decreased with increase in the content of the waste stone sludge. The...

Waste fibers produced from manufacturing processes are a byproduct commonly deposited in storing yards and/or landfills and thus results in many serious environmental problems in Iran. If these waste materials could be advantageously put to practical use in any application, it would reduce the burden on the environment and landfills. This paper compares the performance of the stone matrix aspha...

The present Experimental investigation is to study the Mechanical Properties of the Fly ash concrete reinforced with steel fibers. The concrete composite comprises of steel fibers in different percentages and partial replacement of cement in different proportions. Steel fibers varied from 0%, 0.5%, 1% and 1.5% by weight of cement and replacement of fly ash varied from 0%, 10%, 20%, 30% and 40% ...

Background: (PMMA) has been used in dental prosthetic devices for almost 70 years; three features have contributed for its success: excellent appearance, simple processing technique and easy repair. However, the resistance to impact and fracture of PMMA during function is low. Various methods for enhancing strength of the acrylic resin denture bases have been reported. This study was designed t...

The widespread use of porcelain in restorative dentistry is generally due to its esthetic appearance even though it is brittle. The transverse strength, or modulus rupture, averages around 108 MPa (16,000 psi) for aluminous porcelain and 88 MPa (13,000 psi) for feldspathic porcelain. The tensile strength, as determined by diametral compression, is approximately 29 MPa (4,200 psi) for opaque fel...

The disposal of used tires is a major environmental problem throughout the world which causes environmental hazards. Crumb rubber is a waste material that is ideal for use in concrete applications. The aim of this study is achieved to use of rubber waste as partial replacement of fine aggregate to produce rubberize concrete in M30 mix. Different partial replacements of crumb rubber (0, 5, 10, 1...

The paper presents the suitability of flyash-limephosphogypsum composite for its use in road pavements. The content of lime and phosphogypsum was varied from 2 to 10% and 0.5 to 4% respectively in flyash. The specimen prepared was cured for 7, 28, 56 and 90 days with burlap method of curing. Compaction tests were conducted on different flyash-lime-phosphogypsum composite and these results were ...

Out-of-plane compression tests were conducted on six grades of ultra high molecular weight polyethylene fibre composites (Dyneema) with varying grades of fibre and matrix, ply thickness, and ply stacking sequence. The composites with a [01/901] lay-up had an out-of-plane compressive strength that was dictated by in-plane tensile fibre fracture. By contrast, the out-of-plane compressive strength...