a newly developed heavy duty diesel engine in dual fuel mode of operation has been studied in detail. the main fuel would be natural gas and diesel oil as pilot injection. the importance and effects of mixture preparation and formation through ports, valves and in cylinder flow field with different swirl ratio and tumble on diesel combustion phenomena is an accepted feature which has been studi...

In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. The flow stress and strain corresponding to the critical, pe...

This paper describes particle transport in Stokes flow in a two-dimensional corner whose walls oscillate, which is a simple model for particle transport in the pulmonary alveoli. Formally speaking, the wall motion produces a perturbation to the wellknown Moffatt corner eddies. However, this ‘perturbation’ is dominant as the corner is approached. The motion of particles is regular near to the co...

The original formulation of the MRS–Lade model, with non–associated flow rule on the meridian plane in the cone region, has a corner. In order to reduce the computational effort of corner solution algorithms, a modified plastic flow potential for the cone part is found in the literature. This modification may have a non–admissible flip over of the flow vector in the cone–cap intersection if the...

in this work dynamic recrystallization behavior of aisi 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 c -1200 c and strain rate range of 0.001 s-1 - 1 s-1. the obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. the flow stress and strain corresponding to the critical, pe...

In the past decade a large amount of analysis techniques have been scaled down to the microfluidic level. However, in many cases the necessary sample preparation, such as separation, mixing and concentration, remains to be performed off-chip. This represents a major hurdle for the introduction of miniaturized sample-in/answer-out systems, preventing the exploitation of microfluidic’s potential ...

A three-dimensional deformable capsule convected through a square duct with a corner is studied via numerical simulations. We develop an accelerated boundary integral implementation adapted to general geometries and boundary conditions. A global spectral method is adopted to resolve the dynamics of the capsule membrane developing elastic tension according to the neo-Hookean constitutive law and...

Most information received by the human is acquired through vision. However, image has the largest data amount in three information forms. If the image is not compressed, high transmission rate for digital image transmission and tremendous capacity for digital image storage can hinder the development of digital image. For example, for a color image whose resolution rate is 1280×1024, each pixel ...

The corner separation in the high-loaded compressors deteriorates the aerodynamics and reduces the stable operating range. The flow pattern is further complicated with the interaction between the aperiodic corner separation and the periodically wake-shedding vortices. Accurate prediction of the corner separation is a challenge for the Reynolds-Averaged Navier–Stokes (RANS) method, which is base...