Fischer-Tropsch synthesis is one of the most important catalytic reactions that convert the synthetic gas to light and heavy hydrocarbons. One of the main issues is selecting the type of reactor. The slurry bubble reactor is suitable choice for FischerTropsch synthesis because of its good qualification to transfer heat and mass, high durability of catalyst, low cost maintenance and repair. The ...

A series of x(Co, Mn)/TiO2 catalysts (x=2–12wt.%) containing 25%Co and 75%Mn were prepared by the co-impregnation method. All prepared catalysts have been tested in Fischer-Tropsch synthesis for production of C2-C4 olefins. It was found that the catalyst containing 8wt.%(Co,Mn)/TiO2 is an optimal catalyst for production of C...

Catalyst productivity and selectivity to C5+ hydrocarbons are critical design criteria in the choice of Fischer-Tropsch synthesis (FTS) catalysts and reactors. Cobalt-based catalysts appear to provide the best compromise between performance and cost for the synthesis of hydrocarbons from CO/H2 mixtures. Optimum catalysts with high cobalt concentration and site density can be prepared by control...

Using DC-Plasma Enhanced Chemical Vapour Deposition (PECVD) system, the impact of pure Co onthe growth of diamond-like carbon (DLC) nano-structures were investigated. In this study, Acetylene(C2H2) was diluted in H2 and used as the reaction gas and Cobalt (Co) nano-particles were used asthe catalyst. The effect of preparing Co catalyst at temperatures of 240°C and 350°C and growthconditions was...

In this research we used Heavy Propylene Tetramer (HPT) and A1C13 —BF3 (Lewis acids) ascatalyst and ethanol, n-propanol and n-butanol as co-catalyst. Using Lewis acids as catalyst, theHPTs form molecules with higher molecular weight. Since the raw materials of the reaction are byproducts of other reactions, are not pure and contain various compounds with different M.W andalso different chemical...

The metallic Co catalyst for the Fischer-Tropsch reaction is prepared by reduction of Co salts impregnating microporous silica. The average size of the metallic Co clusters is determined from the average number of neighbours deduced from Co K-edge EXAFS of catalyst samples. A model EXAFS signal constructed from the scattering paths of Co metal fcc lattice with lengths up to 5 A is calibrated on...

Nitrogen-doped onion-like carbon-rich materials were synthesized by heat treatment of a ‘‘hybrid’’ containing hexamethylene diamine complex in the presence of Co and Fe species while preparing non-precious metal electrocatalyst for oxygen-reduction. As demonstrated by electrochemical rotating disk electrode and fuel cell tests, the binary CoFe-based catalyst containing graphitized onion-like ca...

the effect of temperature variation on the growth of carbon nanotubes (cnts) using thermal chemical vapor deposition (tcvd) is presented. nickel and cobalt (ni-co) thin films on silicon (si) substrates were used as catalysts in tcvd technique. acetylene gas was used in cnts growth process at the controlled temperature ranges from 850-1000 ̊ c. catalysts and cnts characterization was carried out ...

the kinetic of fischer-tropsch synthesis over a co-precipitated fe-ce catalyst was investigated in a fixed bed micro reactor. experimental conditions were varied as follow: reaction pressure 1-15bar, h¬¬¬2/co feed ratio of 1-3 and space velocity of 3600-5400 h-1 at the temperature range of 270-310°c. 4 models according to the langmuir-hinshelwood-hougen-watson (lhhw) type rate equation were der...

Synthesis of clean double-walled carbon nanotubes by a catalytic chemical vapour deposition (CCVD) method is reported; the catalyst is a Mg(1 - x)Co(x)O solid solution containing additions of Mo oxide; this MgO-based catalyst can be easily removed, leading to gram-scale amounts of clean carbon nanotubes, 77% of which are double-walled carbon nanotubes.