نتایج جستجو برای: cercon
تعداد نتایج: 76 فیلتر نتایج به سال:
PURPOSE The purpose of this study was to investigate the possible radioactive potential of zirconium dioxide (ZrO2) dental ceramics. Such information is necessary since they became an integral part of routine prosthetic rehabilitations and devoid of scientific information about their radioactivity creates some concern in the dental community. METHODS Four different types of commercial ZrO2 ce...
This study investigated the influence of ceramic compositions on Knoop Hardness Number (KHN) immediately and 24 h after polymerization and the effect of activation modes on the KHN of a resin cement. Ten Panavia F 2.0 resin cement discs were activated either directly using curing light, or chemically without light, or through 1.2-thick ceramic discs. The following ceramics were evaluated: Ducer...
Objective The aim of this in vitro study was to investigate the effect of Shoulder versus Chamfer margin design on the marginal adaptation of zirconia (Zr) copings. Materials and Methods 40 extracted molar teeth were mounted in resin and prepared for zirconia crowns with two margin preparation designs (20=Shoulder and 20=Chamfer). The copings were manufactured by Cercon® (DeguDent GmbH, Germa...
The purpose of this in vitro study was to compare the precision of fit of substructures milled from semi-sintered zirconia blocks, fabricated with two different fabrication concepts. Three-unit, posterior fixed dental prostheses (FDP) were fabricated for standardized dies (n = 10) with the laboratory Computer Aided Design (CAD)/Computer Aided Manufacturing (CAM) system Cercon® Brain (Brain) and...
OBJECTIVES The purpose of this in vitro study was to compare the marginal adaptation and fracture resistance of a zirconia-based all-ceramic restoration with two preparation designs. MATERIALS AND METHODS Twenty-four mandibular premolars were randomly divided into two groups (n=12); the conventional group received a peripheral shoulder preparation and the modified group received a buccal shou...
The appropriate convergence angle (CA) for adequate retention and resistance of cast crowns has always been a matter of research and discussion. The purpose of this study was to measure the CA of tooth preparation for single crown (SC) or as abutments for fixed partial denture (FPD) carried out by final-year undergraduate dental students at the College of Dentistry, King Saud University and to ...
مقدمه: یکی از نقاط ضعف سرامیکهای زیرکونیایی، باند ضعیف آنها با ونیر پرسلنی است. استفاده از لاینر و نیز پرسلنهای مختلف برای غلبه بر این امر پیشنهاد شده است. هدف این مطالعه بررسی این دو عامل بر روی استحکام باند ریزکششی در یک نوع سرامیک زیرکونیایی تهیه شده به روش CAD-CAM بود. مواد و روشها: در این مطالعه آزمایشگاهی-تجربی 12 نمونه دیسکی شکل (5/3×4/19 میلی متر) از سرامیک Cercon (Degussa, Hanau, G...
سابقه و هدف: از آنجا که در سیستم های تمام سرامیکی موجود، کور زیرکونیایی به صورت رایج و به شکل یک لایه با ضخامت یکنواخت ساخته می شود، پرسلن ونیر شده در نواحی مختلف ضخامت های متفاوتی داشته، در نتیجه تحت تاثیر نیروهای مضغی سریع تر دچار chipping و در نهایت شکست می شود. هدف از این مطالعه مقایسه نیروی منجر به شکست روکش های تمام سرامیکی ساخته شده با دو طراحی مختلف کور زیرکونیایی در سیستم cercon در شرا...
OBJECTIVE One of the major problems of all ceramic restorations is their probable fracture against the occlusal force. The aim of the present in-vitro study is was to compare the effect of two marginal designs (chamfer & shoulder) on the fracture resistance of zirconia copings, CERCON (CAD/CAM). MATERIALS AND METHODS This in vitro study was done with single blind experimental technique. One s...
This study evaluated: (1) the effect of different ceramics on light attenuation that could affect microhardness, measured as the Knoop Hardness Number (KHN), of a resin cement immediately and 24 hours after polymerization and (2) the effect of different activation modes (direct light-activation, light activation through ceramics and chemical activation) on the KHN of a resin cement. Resin cemen...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید