LUSI mud obtained from the mud volcano in Sidoarjo, Indonesia, is a viable aluminosilicate material to be utilized as pozzolanic material. LUSI is an abbreviation of the local name of the mud, i.e., Lumpur Sidoarjo, meaning Sidoarjo mud. This paper reports the results of an investigation to assess the pozzolanic activity of LUSI mud, especially in semi high volume pozzolanic mortar. In this cas...

Polymer modification of mortar and concrete can lead to improved transport and mechanical properties and thus its potential for an inhibiting effect on ASR or on resulting damage was investigated. An accelerated mortar bar test in a NaOH solution bath at 80 oC had already been established as inadequate to assess the behaviour of polymer-cement mortars (PCMs) under ASR, but compared to that of a...

Method: At first, two optimized fineness levels were attained for both cement substituting materials used in this study (GGW as glass fine ˂ 38μm (GF), glass superfine ˂ 25μm (GSF) and EAFS as slag fine ˂ 75μm (SF), slag superfine ˂ 32μm (SSF)). In addition to control mortar (CM), four types of binary mortar mixtures were cast by substituting cement 5-20% with GGW (GF and GSF) and 10-30% with E...

The objective of this study is to examine the effect of substitution of cement by three different mineral additions, on the mortar rheological and mechanical properties. This experimentation, considers the fineness of mineral additives with a constant workability. Ordinary Portland Cement was partially replaced by different percentages of slag, pozzolana and metakaolin of 10, 20 and 30%. The ob...

Hart, Stephanie, "Characterization and restoration of historic Rosendale cement mortars for the purpose of restoration" (2012). ABSTRACT Mortar was a very common building material in today's historic sites. Before Portland cement was manufactured at a global level, Rosendale cement was commonly used in these mortars. Over time, these mortars in historic sites have begun to break down and wear a...

Concrete is probably the most extensively used construction material in the world. However, environmental concerns regarding rapid consumption of natural resources and CO2 emission during cement manufacturing process have brought pressure to reduce cement consumption by the use of cement replacement materials (CRMs). The utilization of calcined clay (metakaolin) and silica fume in concrete has ...

The addition of short carbon fibers in the optimum amount of 0.5% of the cement weight to mortar increased the brick-to-mortar bond strength by 150% under tension and 110% under shear when the gap between the adjoining bricks was fixed, and by 50% under tension and 44% under shear when this gap was allowed to freely decrease due to the weight of the brick above the joint. This effect is attribu...

The uniaxial compression response of manufactured sand mortars proportioned using different water-cement ratio and sand-cement ratio is examined. Pore structure parameters such as porosity, threshold diameter, mean diameter, and total amounts of macropores, as well as shape and size of micropores are quantified by using mercury intrusion porosimetry (MIP) technique. Test results indicate that s...

Cement mortar is used as a conglomerate in the majority of construction work. There are multiple variants of cement according to the type of aggregate used in its fabrication. One of the major problems that occurs while working with this type of material is the excessive loss of moisture during cement hydration (setting and hardening), known as shrinkage, which provokes a great number of constr...

Full scale tests with crushed concrete used in sub-bases in roads show that the material has capacity to reharden, very slowly but also after prolonged periods of time. The rehardening process in crushed concrete aggregate has been analysed with a thermogravimetric method, comparing the change in chemical composition in the aggregate when set with water, compacted and hardened. It has been show...