the effects of cementation and the physical properties of grains on the shear behavior of grouted sands are investigated in this paper. the consolidated-undrained triaxial shear behavior of three grouted carbonate sands with different physical properties, including particle size distribution, particle shape and void ratio, was studied. two sands were obtained from the north shores of the persia...

Experimental evidence for a correlation between paperboard edgewise compressive strength and the product of the in-plane normal stiffness and out-of-plane shear stiffness is presented. A mathematical theory, which describes compressive failure as interlaminae shear failure due to prebuckling bending of an initially curved "critical" lamina, is developed. The theory is in accord with failure ana...

The addition of steel fibers into concrete improves the postcracking tensile strength of hardened concrete and hence significantly enhances the shear strength of reinforced concrete reinforced concrete beams. However, developing an accurate model for predicting the shear strength of steel fiber reinforced concrete (SFRC) beams is a challenging task as there are several parameters such as the co...

introdouction: esthetic demands of patients have led to the introduction of tooth-colored restorations wherecomposite resins are bonded to the enamel using acid etch techniques. total etch adhesion systems are still considered as the gold standard among bonding systems. however, clinicians have a tendency to use adhesive systems with simpler application procedures. the aim of the present study ...

In this research in-plane shear Behavior of composite steel-concrete shear walls was investigated considering the Effects of steel plates thickness, spaces between shear studs, shape and type of shear studs and existing of minimum reinforcement in wall section. Several finite element models were analyzed and Numerical results of two models were taken under verification with existent experimenta...

due to the existence of fibrous materials such as plastic fragments, the strength anisotropy of municipal solid waste (msw) materials is the main source of differences between their mechanical response in direct shear and triaxial apparatus. as an extension of earlier research on the mechanical behavior of msw using a large traixail apparatus, results presented in shariatmadari et al. [1] and k...

The availability of suitable road construction materials that meet the specification requirements is becoming scarce, therefore use marginal presents challenges during and performance when used in projects. This study exploited gap existed by investigating engineering properties cinder gravel sourced from Meru County Kenya. objectives were to evaluate characteristics neat blended for suitabilit...

introduction :the aim of this study was to evaluate and compare the in vitro effect of the erbium-doped yttrium aluminum garnet (er:yag) laser with different radiation distances and high-speed rotary treatment on the shear bond strength of flowable composite to enamel of human permanent posterior teeth . methods : freshly extracted human molar teeth with no caries or other surface defects were ...