In presented work authors analyzed the high-temperature oxidation process from the point of view of its influence on effects obtained during cast iron hot-dip zinc coating. Research concerned the influence of the high-temperature oxidation, as a preliminary stage previous to coating with zinc on the change of surface layer structure as well as subsurface layer of cast iron with flake, vermicula...

From the standpoint of processing, hard chromium layer plate may be applied to steels, cast iron, aluminum and nickel base alloys. Cast iron can be plated provided that the surface is capable of conducting the required current and is reasonably free of voids, pits, gross silicate inclusions, and massive segregation. There are many difficulties arising from graphite phase and deposition of hydro...

Industrial and experimental induction furnaces are used for melting various types of iron ingots, returned scraps and DRI sponge pellets to produce high purity cast - iron and steel heats. The lowest consumption of electrical energy determined for continuous feeding operation is 0.3 KWH/Kg for the production of cast - iron in a 1.5 - ton industrial furnace and 0.45 KWH/Kg for the production of ...

In order to handle long living radioactive waste Sweden is planning to build a deep repository that requires no monitoring by future generations. The spent nuclear fuel will be encapsulated in copper canisters consisting of a graphite cast iron insert shielded by an outer 30-50 mm thick copper cylinder for corrosion protection. A subpart of the final risk assessment is to determine the risk of ...

Cast iron (CI) is one of the oldest materials in commercial use. It has excellent compressive strength and is commonly used for structures that require this property, as well as for water and sewer lines. This article explains CI metallurgy and why the understanding of this metallurgy is key to understanding other ferrous materials and alloys. The composition of cast iron (CI) varies significan...

The energy cost of walking with axillary crutches and each of three types of plaster casts (long, short, and cylinder) on the lower extremity was measured in twenty normal adult men. The knee and ankle joints were immobilized unilaterally in the neutral positions. Oxygen uptake was measured using a modified Douglas-bag technique. Heart rate, respiratory rate, and step frequency were telemetered...

Ni-Hard4 white cast iron is excellent wear resistant material and has been widely used in wearaffected equipment operated under extreme conditions, such as in mineral processing, cement, copper and iron manufacturing. In this study the effect of titanium addition (1.2, 0.7 and 0.2 wt.%) to the Ni-hard 4 cast iron with the nominal composition of Si= 1.5%, Mn=0.5%, C=3%, P=0.05%, S= 0.05%, Mo= 0....