Biofilm formed on carbon steel by various species of bacterial cells causes serious problems such as corrosion of steel, choking of flow in the pipe, deterioration of the heat-transfer efficiency, and so on. Cathodic protection is known to be a reliable method for protecting carbon steel from corrosion. However, the initial attachment of bacteria to the surface and the effects of cathodic prote...

Carbon dioxide corrosion has been widely studied in the field and laboratory. It is recognized that flow regime and metallurgy are important factors that influence in-situ corrosion rates but there are relatively few documented case studies that are able to separate the individual contributions of corrosion, flow regime and metallurgy on the observed corrosion damage. This paper deals with fail...

The inhibitive action of extract of curry leaves (Murraya koenigii) on carbon steel in 1N HCl has been studied using weight loss, gasometric studies and electrochemical polarization and AC impedance measurements. The effect of temperature on the corrosion behaviour of carbon steel in 1N HCl with optimum concentration of inhibitors was studied in the temperature ranging from 30 -80 ̊C. The protec...

The corrosion inhibition of carbon steel in 1.0 mol L HCl in the presence of an antibacterial sulfa drug Sulfathiazole, IUPAC name 4-amino-N-(1,3-thiazol-2-yl) benzene sulfonamide (TBSA) was investigated using mass loss and electrochemical measurements such as: potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Surface chemistry was analyzed by X-ray photoelectron sp...

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for ...

Oil reservoir production systems are usually associated with a temperature gradient and oil production facilities frequently suffer from pipeline corrosion failures. Both bacteria and archaea potentially contribute to biocorrosion of the oil production equipment. Here the response of microbial populations from the petroleum reservoir to temperature gradient and corrosion of carbon steel coupons...

Water wetting is a crucial issue in carbon dioxide (CO2) corrosion of multiphase flow pipelines made from mild steel. This study demonstrates the use of a novel benchtop apparatus, a horizontal rotating cylinder, to study the effect of water wetting on CO2 corrosion of mild steel in two-phase flow. The setup is similar to a standard rotating cylinder except for its horizontal orientation and th...

nowadays, magnesia carbon refractories are very important for the iron and steel industries. it is dueto their unique properties, such as low wet ability with melt iron and steel. therefore, it is importantto extend the life of the refractory. in this research, the effect of calcined alumina and nano carbon onmechanical strength and corrosion resistance against slag in magnesia carbon refractor...

The present work has as main aim to make a small introduction about the types of steels, specially the ones used in the construction industry. This material is appreciated in construction due to its many advantages as strengths, resistance, adaptability and flexibility in design, durability, recyclability,...; even thou its also has week points like a low resistance to fire, weak against corros...

AE monitoring from various types of stress corrosion cracking (SCC) has been conducted for the past 15 years in our laboratory. This paper discusses AE results of active-path dissolution-type SCC of austenitic stainless steel in chloride solution and fused salt, fluoride and polythionic acid solutions, brass in ammonia (Mattosson's solution), and carbon steels in nitrite solution. Transgranular...